On Monday 02 April 2012, Roland Stigge wrote:

The i2c bus driver i2c-pnx.c (used by mach-pnx4008 and mach-lpc32xx) was
updated to support device tree. In this process, the struct i2c_pnx_data was
eliminated. Therefore, the platform data of pnx4008 is adjusted with this patch
to use default resources for mem and irq. DT support for pnx4008 is still not
available, but i2c-pnx.c now supports both DT and non-DT.

arch/arm/mach-pnx4008/include/mach/i2c.h can safely be removed now since its
contents is integrated in the updated i2c-pnx.c driver and was duplicated
between platforms pnx4008 and lpc32xx.

Signed-off-by: Roland Stigge <stigge-uj/7R2tJ6VmzQB+pC5nmwQ@public.gmane.org>

Hi Roland,

The i2c changes look ok, but the order breaks bisection through the series.

Since the changes in pnx4008 are fairly localized, I would suggest merging
all three patches through the i2c tree and reorganizing the changes so
that each change is atomic. I would suggest an order like:

1. fix suspend
2. move contents of mach/i2c.h from pnx4008 and lpc32xx to i2c driver
3. change driver and platform device definitions to use resources instead
   of platform data
4. add support for device tree based probing

	Arnd