[net-next 07/10] ixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring
flat view
STALE5346d
REVIEWED: 1 (0M)
From: Jeff Kirsher <hidden>
Date: 2012-03-03 02:24:37
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 2 in this series; 1 review trailer.
Revisions (2)
- v1
- v1 current
From: Alexander Duyck <redacted> This patch is meant to address several minor issues in ixgbe_xmit_frame_ring. Specifically it adds a comment explaining the TXSW flag, and correctly wraps a line over 80 characters. Signed-off-by: Alexander Duyck <redacted> Tested-by: Phil Schmitt <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 17 +++++++++++------ 1 files changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 4e55860..1cf676b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c@@ -7012,11 +7012,6 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, return NETDEV_TX_BUSY; } -#ifdef CONFIG_PCI_IOV - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) - tx_flags |= IXGBE_TX_FLAGS_TXSW; - -#endif /* if we have a HW VLAN tag being added default to the HW one */ if (vlan_tx_tag_present(skb)) { tx_flags |= vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT;
@@ -7029,10 +7024,20 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, goto out_drop; protocol = vhdr->h_vlan_encapsulated_proto; - tx_flags |= ntohs(vhdr->h_vlan_TCI) << IXGBE_TX_FLAGS_VLAN_SHIFT; + tx_flags |= ntohs(vhdr->h_vlan_TCI) << + IXGBE_TX_FLAGS_VLAN_SHIFT; tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; } +#ifdef CONFIG_PCI_IOV + /* + * Use the l2switch_enable flag - would be false if the DMA + * Tx switch had been disabled. + */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + tx_flags |= IXGBE_TX_FLAGS_TXSW; + +#endif /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) ||
--
1.7.7.6