[net-next 07/15] e1000e: potentially incorrect return for e1000_set_d3_lplu_state_ich8lan

From: Bruce Allan <redacted>

In the unlikely event that e1e_wphy() returns an error, the returned error
code is not propogated to the caller of e1000_set_d3_lplu_state_ich8lan().
With this change, there is a rare possibility that ret_val might not get
set so it must be initialized.

Signed-off-by: Bruce Allan <redacted>
Tested-by: Aaron Brown <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index ce348cd..5a55a61 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -2030,7 +2030,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	u32 phy_ctrl;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 data;
 
 	phy_ctrl = er32(PHY_CTRL);

@@ -2096,7 +2096,7 @@ static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
 		ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
 	}
 
-	return 0;
+	return ret_val;
 }
 
 /**

-- 
1.7.7.6