[net 7/8] ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state
From: Jeff Kirsher <hidden>
Date: 2012-02-09 09:34:28
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: John Fastabend <redacted> Users expect the up2tc mapping to be maintained across a DCB enable/disable/enable transition. And since we maintain all the other DCB attributes we should do this for up2tc mappings as well just to be consistent. Also without this we break user space applications that expect this to occur that previously worked. Signed-off-by: John Fastabend <redacted> Tested-by: Stephen Ko <redacted> Tested-by: Ross Brattain <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index 005e5f2..79a92fe 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c@@ -112,6 +112,8 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) { u8 err = 0; + u8 prio_tc[MAX_USER_PRIORITY] = {0}; + int i; struct ixgbe_adapter *adapter = netdev_priv(netdev); /* Fail command if not in CEE mode */
@@ -122,10 +124,15 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) return err; - if (state > 0) + if (state > 0) { err = ixgbe_setup_tc(netdev, adapter->dcb_cfg.num_tcs.pg_tcs); - else + ixgbe_dcb_unpack_map(&adapter->dcb_cfg, DCB_TX_CONFIG, prio_tc); + } else { err = ixgbe_setup_tc(netdev, 0); + } + + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + netdev_set_prio_tc_map(netdev, i, prio_tc[i]); return err; }
--
1.7.7.6