[PATCH v2 06/10] e1000e: Support sending custom Ethernet CRC.
From: <hidden>
Date: 2012-02-08 19:56:06
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Ben Greear <redacted> This can aid with testing the RX logic for bad CRCs. Signed-off-by: Ben Greear <redacted> --- :100644 100644 e3eefda... 2f9434c... M drivers/net/ethernet/intel/e1000e/netdev.c drivers/net/ethernet/intel/e1000e/netdev.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index e3eefda..2f9434c 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c@@ -4618,6 +4618,7 @@ link_up: #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 #define E1000_TX_FLAGS_IPV4 0x00000008 +#define E1000_TX_FLAGS_NO_FCS 0x00000010 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16
@@ -4877,6 +4878,9 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK); } + if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) + txd_lower &= ~(E1000_TXD_CMD_IFCS); + i = tx_ring->next_to_use; do {
@@ -4894,6 +4898,10 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); + /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */ + if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS)) + tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS)); + /* * Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only
@@ -5099,6 +5107,9 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, if (skb->protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; + if (unlikely(skb->no_fcs)) + tx_flags |= E1000_TX_FLAGS_NO_FCS; + /* if count is 0 then mapping error has occurred */ count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss); if (count) {
@@ -6226,6 +6237,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* Set user-changeable features (subset of all device features) */ netdev->hw_features = netdev->features; netdev->hw_features |= NETIF_F_RXFCS; + netdev->priv_flags |= IFF_SUPP_NOFCS; if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) netdev->features |= NETIF_F_HW_VLAN_FILTER;
--
1.7.3.4