[PATCH net-next 3/4] qlcnic: Fix firmware abort code check.
From: Sony Chacko <hidden>
Date: 2012-02-04 00:01:40
Subsystem:
networking drivers, qlogic qlcnic (1/10)gb ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Shahed Shaikh, Manish Chopra, Linus Torvalds
From: Sritej Velaga <redacted> Check bits 8-28 of peg_halt status register for firmware abort code. Signed-off-by: Sritej Velaga <redacted> Signed-off-by: Sony Chacko <redacted> --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index a47c70b..dba9531 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c@@ -3159,7 +3159,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) QLCRD32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x3c), QLCRD32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c)); peg_status = QLCRD32(adapter, QLCNIC_PEG_HALT_STATUS1); - if (LSW(MSB(peg_status)) == 0x67) + if (QLCNIC_FWERROR_CODE(peg_status) == 0x67) dev_err(&adapter->pdev->dev, "Firmware aborted with error code 0x00006700. " "Device is being reset.\n");
--
1.6.4.4