Re: Regression in skge that started around acb42a3 (so past v3.3-rc1)
flat view
From: Stephen Hemminger <hidden>
Date: 2012-01-30 16:38:49
Also in:
lkml
On Mon, 30 Jan 2012 10:58:16 -0500 Konrad Rzeszutek Wilk [off-list ref] wrote:
I hadn't done any git bisection yet, but with acb42a3 I started getting this: (and only on i686 - x86_64 does not show these): (This is with Xen, the other one is without) [ 28.602121] eth2: no IPv6 routers present [ 70.457712] eth2: hw csum failure. [ 70.458695] Pid: 0, comm: swapper/0 Not tainted 3.3.0-rc1-00287-gacb42a3 #1 [ 70. [ 70.458695] [<c140942b>] __skb_checksum_complete+0xb/0x10 [ 70.458695] [<c148e3b0>] nf_ip_checksum+0x60/0x120 [ 70.458695] [<c143ee6b>] udp_error+0xbb/0x1f0 [ 70.458695] [<c103c1e4>] ? check_events+0x8/0xc [ 70.458695] [<c103c1db>] ? xen_restore_fl_direct_reloc+0x4/0x4 [ 70.458695] [<c11497ee>] ? put_cpu_partial+0x9e/0xb0 [ 70.458695] [<c143edb0>] ? udp_pkt_to_tuple+0x60/0x60 [ 70.458695] [<c143a2b6>] nf_conntrack_in+0xc6/0x5c0 [ 70.458695] [<c14751f8>] ? __udp4_lib_rcv+0x428/0x630 [ 70.458695] [<c1149dd0>] ? kfree+0xf0/0x120 [ 70.458695] [<c1405b60>] ? skb_release_data+0x90/0xb0 [ 70.458695] [<c1405b60>] ? skb_release_data+0x90/0xb0 [ 70.458695] [<c14057d8>] ? __kfree_skb+0x38/0x90 [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 [ 70.458695] [<c148f41e>] ipv4_conntrack_in+0x1e/0x30 [ 70.458695] [<c14360d3>] nf_iterate+0x63/0x90 [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 [ 70.458695] [<c1436292>] nf_hook_slow+0x62/0x140 [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 [ 70.458695] [<c144dbb5>] ip_rcv+0x235/0x310 [ 70.458695] [<c144d510>] ? inet_del_protocol+0x30/0x30 [ 70.458695] [<c1412c36>] __netif_receive_skb+0x1d6/0x550 [ 70.458695] [<c147c6a9>] ? inet_gro_receive+0x59/0x1f0 [ 70.458695] [<c1413312>] netif_receive_skb+0x22/0x90 [ 70.458695] [<c1413487>] napi_skb_finish+0x37/0x50 [ 70.458695] [<c14139e3>] napi_gro_receive+0xe3/0xf0 [ 70.458695] [<c12ff4c0>] ? xen_swiotlb_map_sg+0x20/0x20 [ 70.458695] [<c12ff4d9>] ? xen_swiotlb_unmap_page+0x19/0x20 [ 70.458695] [<f7983d6c>] skge_poll+0x34c/0x6f4 [skge] [ 70.458695] [<c141431a>] net_rx_action+0xfa/0x2a0 [ 70.458695] [<c107cecf>] __do_softirq+0x9f/0x210 [ 70.458695] [<c107ce30>] ? irq_exit+0xd0/0xd0 [ 70.458695] <IRQ> [<c107ce15>] ? irq_exit+0xb5/0xd0
The skge driver uses hardware receive checksum where it computes the sum
of the packet (but does not check it). This kind of problem happens when some
part of the call chain above it updates the packet but does not update the checksum.
A fix like the following is presumably needed for some part of this path.
commit fa2da8cdae1dd64f78fc915ca1d1a4a93c71e7cb
Author: stephen hemminger [off-list ref]
Date: Tue Nov 15 08:09:14 2011 +0000
bridge: correct IPv6 checksum after pull
Bridge multicast snooping of ICMPv6 would incorrectly report a checksum prob
when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE.
When bytes are removed from skb, the computed checksum needs to be adjusted.
Signed-off-by: Stephen Hemminger [off-list ref]
Tested-by: Martin Volf [off-list ref]
Signed-off-by: David S. Miller [off-list ref]