[net 5/6] bnx2x: handle CHIP_REVISION during init_one
From: Yuval Mintz <hidden>
Date: 2012-01-23 10:37:48
Subsystem:
broadcom bnx2x 10 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Sudarsana Kalluru, Manish Chopra, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Ariel Elior <redacted> The macro `CHIP_IS_E1x' requires `bp' to be initialized. As `bp' is not yet initialized during this phase of `bnx2x_init_dev', it accessed uninitialized fields in the struct. Signed-off-by: Ariel Elior <redacted> Signed-off-by: Eilon Greenstein <redacted> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index ffeaaa9..f4c2fe5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c@@ -10536,6 +10536,9 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, { struct bnx2x *bp; int rc; + bool chip_is_e1x = (board_type == BCM57710 || + board_type == BCM57711 || + board_type == BCM57711E); SET_NETDEV_DEV(dev, &pdev->dev); bp = netdev_priv(dev);
@@ -10624,7 +10627,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); - if (CHIP_IS_E1x(bp)) { + if (chip_is_e1x) { REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
@@ -10635,9 +10638,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, * Enable internal target-read (in case we are probed after PF FLR). * Must be done prior to any BAR read access. Only for 57712 and up */ - if (board_type != BCM57710 && - board_type != BCM57711 && - board_type != BCM57711E) + if (!chip_is_e1x) REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); /* Reset the load counter */
--
1.7.1