[PATCH] net/can/mscan: add listen only mode
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2011-11-03 13:00:43
Also in:
linux-can
Subsystem:
can network drivers, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Linus Torvalds
This patch adds listen only mode to the mscan controller.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
...can be pulled via:
The following changes since commit 8b3408f8ee994973869d8ba32c5bf482bc4ddca4:
dp83640: free packet queues on remove (2011-10-24 19:14:50 -0400)
are available in the git repository at:
git://git.pengutronix.de/git/mkl/linux-2.6.git can/mscan-listen-only-for-net-next
Marc Kleine-Budde (1):
net/can/mscan: add listen only mode
drivers/net/can/mscan/mscan.c | 8 ++++++--
1 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index ec4a311..74f3b18 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c@@ -581,7 +581,10 @@ static int mscan_open(struct net_device *dev) priv->open_time = jiffies; - clrbits8(®s->canctl1, MSCAN_LISTEN); + if (ctrlmode.flags & CAN_CTRLMODE_LISTENONLY) + setbits8(®s->canctl1, MSCAN_LISTEN); + else + clrbits8(®s->canctl1, MSCAN_LISTEN); ret = mscan_start(dev); if (ret)
@@ -690,7 +693,8 @@ struct net_device *alloc_mscandev(void) priv->can.bittiming_const = &mscan_bittiming_const; priv->can.do_set_bittiming = mscan_do_set_bittiming; priv->can.do_set_mode = mscan_do_set_mode; - priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; + priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | + CAN_CTRLMODE_LISTENONLY; for (i = 0; i < TX_QUEUE_SIZE; i++) { priv->tx_queue[i].id = i;
--
1.7.4.1