Re: Large file copy to NFS mounted directory causes delay in other application packets

Please dont top post on these lists, thanks.

Le mercredi 09 novembre 2011 à 00:13 -0800, Manavalan Krishnan a écrit :

(1) NFS is using TCP
(2) yes eth0 is dedicated to heartbeat and eth1 is dedicated to NFS
(3) I notice the following at the system where file copy is occuring

The kernel Recv-Q of the heartbeat application socket grows but not delivered to the socket recv call. 
Here is the netstat output.

Proto  Recv-Q  Send-Q   Local Address         Foreign Address

udp    11522                0  *:23435                     *:*

OK so the sending side is OK : The delay is at receiver side.

Note that since netstat shows receive queue has some skbs, it should be
available to heartbeat daemon immediately.

As soon as I stop the file transfer, the socket recv call receives the packets and Recv-Q goes 0.
(4) The server has 4 cpu cores and 25G RAM

1) How many nfsd threads are running ?
   grep th /proc/net/rpc/nfsd

2) WHat kind of NIC do you use ?
   lsmod , lspci

3) Hmm, are IRQ to eth0/eth1 handled by same cpu ?
  grep eth /proc/interrupts

4) You could try to cpu affine all nfsd to cpu0,cpu1,cpu2  and heartbeat
daemon to cpu3.
   man taskset

5) You could 'strace -ttt' heartbeat daemon to check if it is not
blocked on some local disk access (it competes with all nfsd threads)