[PATCH net v3 4/9] forcedeth: expose module parameters in /sys/module
From: David Decotigny <hidden>
Date: 2011-11-05 01:53:53
Also in:
lkml
Subsystem:
forcedeth gigabit ethernet driver, networking drivers, the rest · Maintainers:
Rain River, Zhu Yanjun, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
In particular, debug_tx_timeout can be updated at runtime. Signed-off-by: David Decotigny <redacted> --- drivers/net/ethernet/nvidia/forcedeth.c | 18 +++++++++--------- 1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 3f66b74..295652d 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c@@ -6010,23 +6010,23 @@ static void __exit exit_nic(void) pci_unregister_driver(&driver); } -module_param(max_interrupt_work, int, 0); +module_param(max_interrupt_work, int, S_IRUGO); MODULE_PARM_DESC(max_interrupt_work, "forcedeth maximum events handled per interrupt"); -module_param(optimization_mode, int, 0); +module_param(optimization_mode, int, S_IRUGO); MODULE_PARM_DESC(optimization_mode, "In throughput mode (0), every tx & rx packet will generate an interrupt. In CPU mode (1), interrupts are controlled by a timer. In dynamic mode (2), the mode toggles between throughput and CPU mode based on network load."); -module_param(poll_interval, int, 0); +module_param(poll_interval, int, S_IRUGO); MODULE_PARM_DESC(poll_interval, "Interval determines how frequent timer interrupt is generated by [(time_in_micro_secs * 100) / (2^10)]. Min is 0 and Max is 65535."); -module_param(msi, int, 0); +module_param(msi, int, S_IRUGO); MODULE_PARM_DESC(msi, "MSI interrupts are enabled by setting to 1 and disabled by setting to 0."); -module_param(msix, int, 0); +module_param(msix, int, S_IRUGO); MODULE_PARM_DESC(msix, "MSIX interrupts are enabled by setting to 1 and disabled by setting to 0."); -module_param(dma_64bit, int, 0); +module_param(dma_64bit, int, S_IRUGO); MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0."); -module_param(phy_cross, int, 0); +module_param(phy_cross, int, S_IRUGO); MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0."); -module_param(phy_power_down, int, 0); +module_param(phy_power_down, int, S_IRUGO); MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0)."); -module_param(debug_tx_timeout, bool, 0); +module_param(debug_tx_timeout, bool, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(debug_tx_timeout, "Dump tx related registers and ring when tx_timeout happens");
--
1.7.3.1