On Wed, 2011-10-19 at 13:53 -0700, John Fastabend wrote:

As a reference point this works fine in both FCoE and iSCSI stacks
today. The device is reset or link is lost for whatever reason
when the link comes back up the stack logs back in, enumerates
the luns and the scsi stack recovers as expected.

Firmware should do the equivalent login, lun enumeration, etc as
needed.

Just a quick follow-up on this issue.  Our firmware actually performs
the same logout before the reset and login after the reset.  For iSCSI,
the problem on our device was actually caused by our userspace daemon
logging events to a log file in the root fs.  The file I/O was blocked
and the daemon could not proceed to do the important operations during
the reset, and this caused filesystem I/O errors.  We have now fixed the
problem in the userspace daemon.

For FCoE, there is no logging issue and the root fs failure seems to
happen only in a multipath configuration with all paths going down for a
short time (caused by reset in this case).  We believe this also affects
other devices and not just ours.  We are now working with the multipath
maintainer to understand this issue.

So this confirms that the original patch for bnx2x is not needed.

Thanks.