Re: [E1000-devel] intel 82599 multi-port performance

On 09/26/2011 09:40 AM, Chris Friesen wrote:

On 09/26/2011 10:04 AM, Alexander Duyck wrote:

quoted

It sounds like you are using a single card, would that be correct? If
you are running close to line rate on both ports this could be causing
you to saturate the PCIe x8 link.

According to
"http://communities.intel.com/community/wired/blog/2009/06/08/understanding-pci-express-bandwidth"
8x PCIe should have a bandwidth of 4GB/s.  2 10Gigabit ports is 2.5GB/s.

The 82599 only goes up to 8x, so I'd expect that it should be sufficient
to handle the full traffic.

To any of the Intel guys out there...any ideas?  Can an 82599 on an 8x
bus handle max line rate with minimum size packets?

Rick Jones sent me an interesting link related to this.  Short answer seems
to be 'yes', but it seems not for any normal off-the-shelf software stack.

This: http://comments.gmane.org/gmane.linux.network/203602 should lead you to some slide.

Thanks,
Ben

-- 
Ben Greear [off-list ref]
Candela Technologies Inc  http://www.candelatech.com