[net-next 05/11] ixgbe: Add missing code for enabling overheat sensor interrupt
flat view
STALE5493d
SUPERSEDED
From: Jeff Kirsher <hidden>
Date: 2011-09-17 02:15:59
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v1 of 4 in this series.
Revisions (4)
- v1
- v1 current
- v1
- v2 [diff vs current]
From: Alexander Duyck <redacted> This change adds a small bit of missing code for enabling the overheat sensor Signed-off-by: Alexander Duyck <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index df1ea20..0533bc4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c@@ -3543,6 +3543,10 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) gpie |= IXGBE_GPIE_VTMODE_64; } + /* Enable Thermal over heat sensor interrupt */ + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + gpie |= IXGBE_SDP0_GPIEN; + /* Enable fan failure interrupt */ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) gpie |= IXGBE_SDP1_GPIEN;
--
1.7.6