Re: [PATCH v11 6/6] powerpc: Add flexcan device support for p1010rdb.

Allow the p1010 processor to select the flexcan network driver.

Signed-off-by: Robin Holt <redacted>
Acked-by: Marc Kleine-Budde <redacted>,
Acked-by: Wolfgang Grandegger <redacted>,
Cc: U Bhaskar-B22300 <redacted>
Cc: <redacted>,
Cc: <redacted>,
Cc: PPC list <redacted>
Cc: Kumar Gala <redacted>
---
arch/powerpc/boot/dts/p1010rdb.dts  |    8 ++++++++
arch/powerpc/platforms/85xx/Kconfig |    2 ++
2 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts
index d6c669c..df89b60 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dts
+++ b/arch/powerpc/boot/dts/p1010rdb.dts

@@ -171,6 +171,14 @@

			};
		};

+		can@1c000 {
+			clock-frequency = <0x0bebc1fc>;
+		};
+
+		can1: can@1d000 {
+			clock-frequency = <0x0bebc1fc>;
+		};
+

		usb@22000 {
			phy_type = "utmi";
		};

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 498534c..c4304ae 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig

@@ -70,6 +70,8 @@ config MPC85xx_RDB

config P1010_RDB
	bool "Freescale P1010RDB"
	select DEFAULT_UIMAGE
+	select HAVE_CAN_FLEXCAN if NET && CAN
+	select PPC_CLOCK if CAN_FLEXCAN