Re: [PATCH v11 4/5] powerpc: Add flexcan device support for p1010rdb.

On 08/11/2011 06:46 AM, Kumar Gala wrote:

On Aug 10, 2011, at 1:16 PM, Wolfgang Grandegger wrote:

quoted

On 08/10/2011 07:01 PM, Kumar Gala wrote:

quoted

On Aug 10, 2011, at 11:27 AM, Robin Holt wrote:

quoted

I added a simple clock source for the p1010rdb so the flexcan driver
could determine a clock frequency.  The p1010 flexcan device only has
an oscillator of system bus frequency divided by 2.

Signed-off-by: Robin Holt <holt-sJ/iWh9BUns@public.gmane.org>
Acked-by: Marc Kleine-Budde <redacted>,
Acked-by: Wolfgang Grandegger <redacted>,
Cc: U Bhaskar-B22300 <redacted>
Cc: socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Cc: PPC list <linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org>
Cc: Kumar Gala <redacted>
---
arch/powerpc/platforms/85xx/Kconfig    |    2 +
arch/powerpc/platforms/85xx/Makefile   |    2 +
arch/powerpc/platforms/85xx/clock.c    |   52 ++++++++++++++++++++++++++++++++
arch/powerpc/platforms/85xx/p1010rdb.c |    8 +++++
4 files changed, 64 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/85xx/clock.c

I dont understand how mpc85xx_clk_functions() ends up being associated with the frequency the flexcan is running at.

The function mpc85xx_clk_get_rate() returns "fsl_get_sys_freq() / 2" for
Flexcan devices.

quoted

This either seems to global or I'm missing something.

This patch extends the existing Flexcan platform driver for ARM for the
PowerPC using the device tree. Due to the nice integration of the device
tree (of-platform) into the platform driver and devices, the difference
are quite small (see patches 1..3). Apart from the endianess issue, only
the clock needs to be handled in a common way. As ARM already uses the
clk interface, we found it straight-forward to implement it for the
P1010, or more general for the 85xx, as well, instead of using an
additional helper function.

I see, that.  What concerns me is there are numerous clocks / frequencies that exist inside a MPC85xx/P1010 SOC.  The code I'm seeing does NOT seem to do anything to relate this clock JUST to the flexcan.

The clk interface is not commonly used on PowerPC, I know. It's just to
provide compatibility with ARM. An alternative would be to use some
helper function.

quoted

quoted

I still think the clk / freq info should be in the device tree and handled in the driver and NOT arch/powerpc platform code.

If I understand you correctly, you want the boot-loader to provide the
relevant information by fixing up the device tree, which then can be
handled arch-independently by the driver, right?

Yes, that is part of what I want.

This works fine if we just have *one* fixed clock source and frequency.
When there are choices (source and divider) it does make sense to allow
the user to select the frequency via DTS file entries for Linux. Then we
need arch-specific code anyway (to set the relevant registers).
Furthermore we rely on the boot-loader (the usual argument) which is not
a problem for new boards (with new boot-loader), of course.

Wolfgang.