Re: [Bugme-new] [Bug 41152] New: kernel 3.0 and above fails to handle vlan id 0 (802.1p) packets properly without hardware acceleration

Wed, Aug 17, 2011 at 08:36:15AM CEST, mike.auty@gmail.com wrote:

On 17/08/11 06:37, Jiri Pirko wrote:

quoted

Hi Mike. May I ask what NIC are you seeing the regression on?
It may have something to do with dev->vlangrp and ndo_vlan_add/kill_vid.
VID 0 was recently only added by the latter ones. So if driver only
depended on dev->vlangrp, 0 was not there. This was changed recently by
my "vlan cleanup" patches. It may work for you again on net-next today.

Hi there,

I'm finding it on the following two NICs:

02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit
Ethernet Adapter (rev b0)

05:01.0 Network controller [0280]: Broadcom Corporation BCM4306
802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)

and (on a different machine):

02:00.0 Network controller [0280]: Intel Corporation WiFi Link 6000
Series [8086:422c] (rev 35)

I just obtained very similar card (8086:422b). Going to look at it right
away.

One more thing. What do you use to generate vlan0 tagged packets? I'm
using pktgen with "vlan_id 0". Would you please try that it behaves the
same for you?
	

The only one I have had any success with is:

00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit
Network Connection [8086:10ea] (rev 05)

Which I assume is because it has actual hardware acceleration.  I may be
able to put net-next on the Intel Wifi box for testing at some point,
but I don't know how soon I'll be able to do that.  Please let me know
whether that would be a worthwhile test, and if so I'll try and get it
done.  Thanks...

Mike  5:)