[net-next 06/12] dm9000: Move the Davicom driver
flat view
From: Jeff Kirsher <hidden>
Date: 2011-08-13 07:56:42
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Move the Davicom driver into drivers/net/ethernet/davicom/ and
make the necessary Kconfig and Makefile changes.
CC: Ben Dooks <redacted>
CC: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Kirsher <redacted>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/Kconfig | 28 ------------------------
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/davicom/Kconfig | 31 +++++++++++++++++++++++++++
drivers/net/ethernet/davicom/Makefile | 5 ++++
drivers/net/{ => ethernet/davicom}/dm9000.c | 0
drivers/net/{ => ethernet/davicom}/dm9000.h | 0
8 files changed, 38 insertions(+), 29 deletions(-)
create mode 100644 drivers/net/ethernet/davicom/Kconfig
create mode 100644 drivers/net/ethernet/davicom/Makefile
rename drivers/net/{ => ethernet/davicom}/dm9000.c (100%)
rename drivers/net/{ => ethernet/davicom}/dm9000.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e83f559..23155cc 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig@@ -246,34 +246,6 @@ config NET_NETX To compile this driver as a module, choose M here. The module will be called netx-eth. -config DM9000 - tristate "DM9000 support" - depends on ARM || BLACKFIN || MIPS - select CRC32 - select MII - ---help--- - Support for DM9000 chipset. - - To compile this driver as a module, choose M here. The module - will be called dm9000. - -config DM9000_DEBUGLEVEL - int "DM9000 maximum debug level" - depends on DM9000 - default 4 - help - The maximum level of debugging code compiled into the DM9000 - driver. - -config DM9000_FORCE_SIMPLE_PHY_POLL - bool "Force simple NSR based PHY polling" - depends on DM9000 - ---help--- - This configuration forces the DM9000 to use the NSR's LinkStatus - bit to determine if the link is up or down instead of the more - costly MII PHY reads. Note, this will not work if the chip is - operating with an external PHY. - config NET_PCI bool "EISA, VLB, PCI and on board controllers" depends on ISA || EISA || PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 08ee56f..298587f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile@@ -52,7 +52,6 @@ obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o -obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_DEV_APPLETALK) += appletalk/ obj-$(CONFIG_ETHERNET) += ethernet/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 0cec25c..45eef59 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig@@ -24,6 +24,7 @@ source "drivers/net/ethernet/brocade/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cirrus/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" +source "drivers/net/ethernet/davicom/Kconfig" config DNET tristate "Dave ethernet support (DNET)"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index ebe8aee..dfd5146 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ +obj-$(CONFIG_DM9000) += davicom/ obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_NET_VENDOR_DEC) += dec/ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig
new file mode 100644
index 0000000..1809d25
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Kconfig@@ -0,0 +1,31 @@ +# +# Davicom device configuration +# + +config DM9000 + tristate "DM9000 support" + depends on ARM || BLACKFIN || MIPS + select CRC32 + select MII + ---help--- + Support for DM9000 chipset. + + To compile this driver as a module, choose M here. The module + will be called dm9000. + +config DM9000_DEBUGLEVEL + int "DM9000 maximum debug level" + depends on DM9000 + default 4 + ---help--- + The maximum level of debugging code compiled into the DM9000 + driver. + +config DM9000_FORCE_SIMPLE_PHY_POLL + bool "Force simple NSR based PHY polling" + depends on DM9000 + ---help--- + This configuration forces the DM9000 to use the NSR's LinkStatus + bit to determine if the link is up or down instead of the more + costly MII PHY reads. Note, this will not work if the chip is + operating with an external PHY.
diff --git a/drivers/net/ethernet/davicom/Makefile b/drivers/net/ethernet/davicom/Makefile
new file mode 100644
index 0000000..74b31f0
--- /dev/null
+++ b/drivers/net/ethernet/davicom/Makefile@@ -0,0 +1,5 @@ +# +# Makefile for the Davicom device drivers. +# + +obj-$(CONFIG_DM9000) += dm9000.o
diff --git a/drivers/net/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
similarity index 100%
rename from drivers/net/dm9000.c
rename to drivers/net/ethernet/davicom/dm9000.c
diff --git a/drivers/net/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h
similarity index 100%
rename from drivers/net/dm9000.h
rename to drivers/net/ethernet/davicom/dm9000.h
--
1.7.6