[PATCH] ucc_geth: Add SUPPORTED_MII and SUPPORTED_Autoneg
flat view
STALE5548d
From: Joakim Tjernlund <hidden>
Date: 2011-08-04 13:20:20
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The driver supports Autoneg and at least MII. Tell the PHY that to avoid any confusion in the PHY code. Signed-off-by: Joakim Tjernlund <redacted> --- drivers/net/ucc_geth.c | 10 ++++++---- 1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 06a5db3..fa00935 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c@@ -1760,10 +1760,12 @@ static int init_phy(struct net_device *dev) if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII) uec_configure_serdes(dev); - phydev->supported &= (ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full); + phydev->supported &= (SUPPORTED_MII | + SUPPORTED_Autoneg | + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full); if (priv->max_speed == SPEED_1000) phydev->supported |= ADVERTISED_1000baseT_Full;
--
1.7.3.4