Re: AT91: Remove fixed mapping for AT91RM9200 ethernet
flat view
From: Jean-Christophe PLAGNIOL-VILLARD <hidden>
Date: 2011-05-11 04:02:49
Also in:
linux-arm-kernel
On 05:49 Wed 11 May , Jean-Christophe PLAGNIOL-VILLARD wrote:
On 21:54 Sun 08 May , Andrew Victor wrote:quoted
The AT91RM9200 Ethernet controller still has a fixed IO mapping. So: * Remove the fixed IO mapping and AT91_VA_BASE_EMAC definition. * Pass the physical base-address via platform-resources to the driver. * Convert at91_ether.c driver to perform an ioremap(). * Ethernet PHY detection needs to be performed during the driver initialization process, it can no longer be done first.we need to pass the irq too as the hw ip does not belong to Atmel so it can be attached to any irq ca we split is in two file on for -net and the other one for at91 tree
forget we can not split it David don't you mind if we apply it through the at91 tree Best Regards, J.
Best Regards, J. _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel