This patch disables the one shot mode, until the driver has been fixed and
tested to support it.
I'm quite sure I've seen a situation where msg_obj 17 "seemed" to be
pending, while msg_obj 18 and 19 already have been transmitted. But
in that case, I enabled ONESHOT for the can interface, which enables
the DA mode (automatic retransmission is disabled).
Reported-by: Jan Altenberg <redacted>
Signed-off-by: Marc Kleine-Budde <redacted>
Cc: Bhupesh Sharma <redacted>
---
drivers/net/can/c_can/c_can.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 110eda0..2040959 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -1112,8 +1112,7 @@ struct net_device *alloc_c_can_dev(void)
priv->can.bittiming_const = &c_can_bittiming_const;
priv->can.do_set_mode = c_can_set_mode;
priv->can.do_get_berr_counter = c_can_get_berr_counter;
- priv->can.ctrlmode_supported = CAN_CTRLMODE_ONE_SHOT |
- CAN_CTRLMODE_LOOPBACK |
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
CAN_CTRLMODE_LISTENONLY |
CAN_CTRLMODE_BERR_REPORTING;
--
1.7.2.3