RE: About bittiming calculation result

On Monday, February 07, 2011 9:01 PM, Wolfgang Grandegger wrote

Well, only prop_seg+phase_seg=tseg1 is relevant and the 
pch_can driver sets the allowed minimum "tseg1_min1" currently to 1:

static struct can_bittiming_const pch_can_bittiming_const = {
        .name = KBUILD_MODNAME,
        .tseg1_min = 1,
        .tseg1_max = 16,
        .tseg2_min = 1,
        .tseg2_max = 8,
        .sjw_max = 4,
        .brp_min = 1,
        .brp_max = 1024, /* 6bit + extended 4bit */
        .brp_inc = 1,
};

quoted

seg1/seg2/sjw/prop_seg must be more than 1 ?

Then "tseg1_min" should be set to *2*.

Though some drivers accepted by upstream have parameter "tseg1_min" as 1,
Sould we release the patch like below ?
 -         .tseg1_min = 1,
+         .tseg1_min = 2,

Thanks,
-----------------------------------------
Tomoya MORINAGA
OKI SEMICONDUCTOR CO., LTD.