[PATCH net-next 3/8] vmxnet3: Enable HW Rx VLAN stripping by default
flat view
STALE5753d
From: Shreyas N Bhatewara <hidden>
Date: 2011-01-15 00:59:37
Also in:
lkml
Subsystem:
networking drivers, the rest, vmware vmxnet3 ethernet driver · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Ronak Doshi
Make hw vlan tag stripping as enabled by default. Thereby remove the code to conditionally enable it later. Signed-off-by: Guolin Yang <redacted> Signed-off-by: Shreyas N Bhatewara <redacted> --- drivers/net/vmxnet3/vmxnet3_drv.c | 14 +------------- 1 files changed, 1 insertions(+), 13 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 89bcee8..f47db1c 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c@@ -1867,13 +1867,8 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) /* add vlan rx stripping. */ if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) { int i; - struct Vmxnet3_DSDevRead *devRead = &shared->devRead; adapter->vlan_grp = grp; - /* update FEATURES to device */ - devRead->misc.uptFeatures |= UPT1_F_RXVLAN; - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_FEATURE); /* * Clear entire vfTable; then enable untagged pkts. * Note: setting one entry in vfTable to non-zero turns
@@ -1905,11 +1900,6 @@ vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) } VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_UPDATE_VLAN_FILTERS); - - /* update FEATURES to device */ - devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN; - VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, - VMXNET3_CMD_UPDATE_FEATURE); } } }
@@ -2083,10 +2073,8 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter) devRead->misc.uptFeatures |= UPT1_F_LRO; devRead->misc.maxNumRxSG = cpu_to_le16(1 + MAX_SKB_FRAGS); } - if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX) && - adapter->vlan_grp) { + if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) devRead->misc.uptFeatures |= UPT1_F_RXVLAN; - } devRead->misc.mtu = cpu_to_le32(adapter->netdev->mtu); devRead->misc.queueDescPA = cpu_to_le64(adapter->queue_desc_pa);