[net-next-2.6 3/3] ixgbe: Adding 100MB FULL support in ethtool
flat view
From: Jeff Kirsher <hidden>
Date: 2011-01-28 12:29:47
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Atita Shirwaikar <redacted> Current driver does not show 100MB support in ethtool. Adding support for the same. Signed-off-by: Atita Shirwaikar <redacted> Tested-by: Stephen Ko <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ixgbe/ixgbe_ethtool.c | 34 ++++++++++++++++++++++++++++++++-- drivers/net/ixgbe/ixgbe_main.c | 5 ++++- 2 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 2002ea8..309272f 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c@@ -152,7 +152,17 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->supported |= (SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg); + switch (hw->mac.type) { + case ixgbe_mac_X540: + ecmd->supported |= SUPPORTED_100baseT_Full; + break; + default: + break; + } + ecmd->advertising = ADVERTISED_Autoneg; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) ecmd->advertising |= ADVERTISED_10000baseT_Full; if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
@@ -167,6 +177,15 @@ static int ixgbe_get_settings(struct net_device *netdev, ecmd->advertising |= (ADVERTISED_10000baseT_Full | ADVERTISED_1000baseT_Full); + switch (hw->mac.type) { + case ixgbe_mac_X540: + if (!(ecmd->advertising & ADVERTISED_100baseT_Full)) + ecmd->advertising |= (ADVERTISED_100baseT_Full); + break; + default: + break; + } + if (hw->phy.media_type == ixgbe_media_type_copper) { ecmd->supported |= SUPPORTED_TP; ecmd->advertising |= ADVERTISED_TP;
@@ -271,8 +290,19 @@ static int ixgbe_get_settings(struct net_device *netdev, hw->mac.ops.check_link(hw, &link_speed, &link_up, false); if (link_up) { - ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ? - SPEED_10000 : SPEED_1000; + switch (link_speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + ecmd->speed = SPEED_10000; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + ecmd->speed = SPEED_1000; + break; + case IXGBE_LINK_SPEED_100_FULL: + ecmd->speed = SPEED_100; + break; + default: + break; + } ecmd->duplex = DUPLEX_FULL; } else { ecmd->speed = -1;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 602078b..b923e42 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c@@ -6095,7 +6095,10 @@ static void ixgbe_watchdog_task(struct work_struct *work) (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? "10 Gbps" : (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? - "1 Gbps" : "unknown speed")), + "1 Gbps" : + (link_speed == IXGBE_LINK_SPEED_100_FULL ? + "100 Mbps" : + "unknown speed"))), ((flow_rx && flow_tx) ? "RX/TX" : (flow_rx ? "RX" : (flow_tx ? "TX" : "None"))));
--
1.7.3.5