Thread (6 messages) 6 messages, 4 authors, 2011-02-16

Re: [PATCH v2] sh: sh_eth: Add support ethtool

flat view

From: Eric Dumazet <hidden>
Date: 2011-01-11 12:19:03
Also in: linux-sh

Le mardi 11 janvier 2011 à 20:58 +0900, nobuhiro.iwamatsu.yj@renesas.com
a écrit :
From: Nobuhiro Iwamatsu <redacted>

This commit supports following functions.
 - get_drvinfo
 - get_settings
 - set_settings
 - nway_reset
 - get_msglevel
 - set_msglevel
 - get_link
 - get_strings
 - get_ethtool_stats
 - get_sset_count

About other function, the device does not support.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <redacted>
---
quoted hunk ↗ jump to hunk
+static const char sh_eth_gstrings_stats[][ETH_GSTRING_LEN] = {
+	"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+	"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+	"rx_length_errors", "rx_over_errors", "rx_crc_errors",
+	"rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+	"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+	"tx_heartbeat_errors", "tx_window_errors",
+	/* device-specific stats */
+	"rx_current", "tx_current",
+	"rx_dirty", "tx_dirty",
+};
+#define SH_ETH_NET_STATS_LEN  21
+#define SH_ETH_STATS_LEN  ARRAY_SIZE(sh_eth_gstrings_stats)
Why is it needed to report standard device stats ?

quoted hunk ↗ jump to hunk
+
+static int sh_eth_get_sset_count(struct net_device *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return SH_ETH_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void sh_eth_get_ethtool_stats(struct net_device *ndev,
+			struct ethtool_stats *stats, u64 *data)
+{
+	struct sh_eth_private *mdp = netdev_priv(ndev);
+	int i = SH_ETH_NET_STATS_LEN;
+
+	memcpy(data, (unsigned long *)&ndev->stats,
+				SH_ETH_NET_STATS_LEN * sizeof(unsigned long));
This is wrong on 32bit arches.
ndev->stats is an array of "long" values, not u64 ones.
quoted hunk ↗ jump to hunk
+
+	/* device-specific stats */
+	data[i++] = mdp->cur_rx;
+	data[i++] = mdp->cur_tx;
+	data[i++] = mdp->dirty_rx;
+	data[i++] = mdp->dirty_tx;
+}
+

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help