[PATCH 3/3] qlcnic: change module parameter permissions
flat view
STALE5757d
From: Amit Kumar Salecha <hidden>
Date: 2011-01-10 10:15:41
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
o Updating module parameter after driver load is not supported except auto_fw_reset parameter. Changing these parameter after driver load, can have weird result. o Update driver version to 5.0.15. Signed-off-by: Amit Kumar Salecha <redacted> --- drivers/net/qlcnic/qlcnic.h | 4 ++-- drivers/net/qlcnic/qlcnic_main.c | 10 +++++----- 2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 14b6322..44e316f 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h@@ -34,8 +34,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 14 -#define QLCNIC_LINUX_VERSIONID "5.0.14" +#define _QLCNIC_LINUX_SUBVERSION 15 +#define QLCNIC_LINUX_VERSIONID "5.0.15" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 11e3a46..37c04b4 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c@@ -31,15 +31,15 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE " static struct workqueue_struct *qlcnic_wq; static int qlcnic_mac_learn; -module_param(qlcnic_mac_learn, int, 0644); +module_param(qlcnic_mac_learn, int, 0444); MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)"); static int use_msi = 1; -module_param(use_msi, int, 0644); +module_param(use_msi, int, 0444); MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled"); static int use_msi_x = 1; -module_param(use_msi_x, int, 0644); +module_param(use_msi_x, int, 0444); MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled"); static int auto_fw_reset = AUTO_FW_RESET_ENABLED;
@@ -47,11 +47,11 @@ module_param(auto_fw_reset, int, 0644); MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled"); static int load_fw_file; -module_param(load_fw_file, int, 0644); +module_param(load_fw_file, int, 0444); MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file"); static int qlcnic_config_npars; -module_param(qlcnic_config_npars, int, 0644); +module_param(qlcnic_config_npars, int, 0444); MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled"); static int __devinit qlcnic_probe(struct pci_dev *pdev,
--
1.7.3.2