Thread (29 messages) 29 messages, 8 authors, 2011-03-08

[net-next 04/12] e1000e: use either_crc_le() rather than re-write it

flat view
STALE5703d REVIEWED: 1 (0M)

From: <hidden>
Date: 2011-01-07 00:30:47
Subsystem: networking drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Revision v1 of 3 in this series; 1 review trailer.

Revisions (3)
  1. v1
  2. v1
  3. v1 current
From: Bruce Allan <redacted>

For the 82579 jumbo frame workaround, there is no need to re-write the CRC
calculation functionality already found in the kernel's ether_crc_le().

Signed-off-by: Bruce Allan <redacted>
Tested-by: Jeff Pieper <redacted>
Signed-off-by: Jeff Kirsher <redacted>
---
 drivers/net/e1000e/e1000.h   |    1 +
 drivers/net/e1000e/ich8lan.c |   19 +------------------
 2 files changed, 2 insertions(+), 18 deletions(-)
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 2c913b8..4b3802a 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -38,6 +38,7 @@
 #include <linux/netdevice.h>
 #include <linux/pci.h>
 #include <linux/pci-aspm.h>
+#include <linux/crc32.h>
 
 #include "hw.h"
 
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 902e493..5328a292 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1395,22 +1395,6 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
 	}
 }
 
-static u32 e1000_calc_rx_da_crc(u8 mac[])
-{
-	u32 poly = 0xEDB88320;	/* Polynomial for 802.3 CRC calculation */
-	u32 i, j, mask, crc;
-
-	crc = 0xffffffff;
-	for (i = 0; i < 6; i++) {
-		crc = crc ^ mac[i];
-		for (j = 8; j > 0; j--) {
-			mask = (crc & 1) * (-1);
-			crc = (crc >> 1) ^ (poly & mask);
-		}
-	}
-	return ~crc;
-}
-
 /**
  *  e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
  *  with 82579 PHY
@@ -1453,8 +1437,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
 			mac_addr[4] = (addr_high & 0xFF);
 			mac_addr[5] = ((addr_high >> 8) & 0xFF);
 
-			ew32(PCH_RAICC(i),
-					e1000_calc_rx_da_crc(mac_addr));
+			ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
 		}
 
 		/* Write Rx addresses to the PHY */
-- 
1.7.3.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help