Thread (1 message) 1 message, 1 author, 2010-09-23

Re: igmp: Staggered igmp report intervals for unsolicited igmp reports

From: Jason Gunthorpe <hidden>
Date: 2010-09-23 17:46:14
Also in: linux-rdma

On Thu, Sep 23, 2010 at 12:37:28PM -0500, Christoph Lameter wrote:
On Thu, 23 Sep 2010, Jason Gunthorpe wrote:
quoted
On Thu, Sep 23, 2010 at 10:32:17AM -0500, Christoph Lameter wrote:
quoted
quoted
Is the issue you are dropping IGMP packets because the 224.0.0.2 join
hasn't finished? Ideally you'd wait for the SA to reply before sending
a IGMP, but a simpler solution might just be to use the broadcast MLID
for packets addressed to a MGID that has not yet got a MLID. This
would bebe similar to the ethernet behaviour of flooding.
IGMP reports are sent on the multicast group not on 224.0.0.2. 224.0.0.2
is only used when leaving a multicast group.
Hm, that is quite different than in IGMPv3.. How does this work at all
in IB? A message to the multicast group isn't going to make it to any
routers unless the routers use some other means to join the IB MGID.
IPoIB creates a infiniband multicast group via the IB calls for a IP
multicast group. Then IGMP comes into play and the kernel sends the IP
based igmp report. This igmp report must be received by an outside router
(on an IP network) in order to for traffic to get forwarded into the IB
fabric. You can end up with a IB multicast configuration that is all fine
but with loss of the unsolicited packets due to fabric reconfiguration not
being complete yet. The larger the fabric the worse the situation.
But my point is that IB has very limited multicast, if I create a IB
group and then send IGMP into that group *it will not reach a router*.

I have to send something to the all routers group or the all IGMPv3
group to get it to reach a router with any reliably.

The only way this kind of scheme could work is if an IGMPv2 IPoIB
router listens for IB MGID Create notices from the SA and
automatically joins all groups that are created, so it can get IGMPv2
membership reports. Which obviously adds more delay, lag, and risk.

I'm *guessing* that the change in IGMPv3 to send reports to 224.0.0.22
(all IGMPv3 multicast address) is related to this sort of problem, and
it seems like on IB IGMPv2 is not a good fit and should not be used if
v3 is available..

Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help