Thread (30 messages) 30 messages, 5 authors, 2010-04-02

Re: [PATCH] r8169: Fix rtl8169_rx_interrupt()

From: Eric Dumazet <hidden>
Date: 2010-03-17 07:37:23

trimming some cc

Le mercredi 17 mars 2010 à 09:25 +0200, Sergey Senozhatsky a écrit :
Hello,

cumulative patch:

[  155.337373] ------------[ cut here ]------------
[  155.337386] WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0xc1/0x125()
[  155.337390] Hardware name: F3JC                
[  155.337394] NETDEV WATCHDOG: eth0 (r8169): transmit queue 0 timed out
[  155.337397] Modules linked in: pktgen ppp_async crc_ccitt ipv6 ppp_generic slhc snd_hwdep snd_hda_codec_si3054 snd_hda_codec_realtek sdhci_pci sdhci snd_hda_intel snd_hda_codec
asus_laptop sparse_keymap mmc_core led_class snd_pcm snd_timer snd_page_alloc psmouse rng_core snd soundcore sg i2c_i801 evdev serio_raw r8169 mii usbhid hid uhci_hcd ehci_hcd
sr_mod cdrom sd_mod usbcore ata_piix
[  155.337468] Pid: 7, comm: ksoftirqd/1 Tainted: G        W  2.6.34-rc1-dbg-git6-r8169 #47
[  155.337472] Call Trace:
[  155.337481]  [<c102e293>] warn_slowpath_common+0x65/0x7c
[  155.337506]  [<c126ac34>] ? dev_watchdog+0xc1/0x125
[  155.337512]  [<c102e2de>] warn_slowpath_fmt+0x24/0x27
[  155.337517]  [<c126ac34>] dev_watchdog+0xc1/0x125
[  155.337525]  [<c1036afb>] ? run_timer_softirq+0x120/0x1eb
[  155.337530]  [<c1036b51>] run_timer_softirq+0x176/0x1eb
[  155.337536]  [<c1036afb>] ? run_timer_softirq+0x120/0x1eb
[  155.337566]  [<c126ab73>] ? dev_watchdog+0x0/0x125
[  155.337576]  [<c1032d39>] __do_softirq+0x8d/0x117
[  155.337667]  [<c1032dee>] do_softirq+0x2b/0x43
[  155.337729]  [<c1032fc1>] run_ksoftirqd+0x71/0x140
[  155.337745]  [<c1032f50>] ? run_ksoftirqd+0x0/0x140
[  155.337810]  [<c103f60e>] kthread+0x6a/0x6f
[  155.337832]  [<c103f5a4>] ? kthread+0x0/0x6f
[  155.337903]  [<c1002e42>] kernel_thread_helper+0x6/0x1a
[  155.337907] ---[ end trace a22d306b065d4a68 ]---
[  155.350902] r8169 0000:02:00.0: eth0: link up
[  167.350892] r8169 0000:02:00.0: eth0: link up

On receiver ?

I suspect lot of work is needed on this driver to make it working, but I
dont have a machine with said adapter.

Are you in 100 Mb full duplex mode ?

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help