Re: tg3: link is permanently down after ifdown and ifup

Hi, Matt

Matt Carlson wrote:

I understand the problem now.  The problem is that tg3_set_power_state()
puts the phy into a low-power mode when it releases the device.  When
the phy is reacquired, a phy reset is missing to take the device back
out of the low-power mode.

The patch at the bottom of this email is the fix I'm currently testing.
If you wish, you can try it out.

  

Thanks a lot for the fix, I'll ask the guys with access to hardware to 
test it.

The problem with lost link happened to me when link was synchronized
at 1000Mbit/sec. At 100Mbit/sec, ifdown would result in the following
soft lockup:

BUG: soft lockup - CPU#0 stuck for 61s! [events/0:5]
Modules linked in: ehci_hcd usbcore
NIP: c0191f0c LR: c018774c CTR: c0191f04
REGS: ef83fe60 TRAP: 0901 Not tainted (2.6.31)
MSR: 00029000 <EE,ME,CE> CR: 24022084 XER: 00000000
TASK = ef8312c0[5] 'events/0' THREAD: ef83e000
GPR00: f1040000 ef83ff10 ef8312c0 ef8292c0 00000400 00c04808 00000000 
00000000
GPR08: 00000000 00000000 00000006 00c04800 44024084
NIP [c0191f0c] tg3_read32+0x8/0x18
LR [c018774c] _tw32_flush+0x94/0xa4
Call Trace:
[ef83ff10] [ef8314b8] 0xef8314b8 (unreliable)
[ef83ff30] [c0192074] tg3_adjust_link+0x98/0x24c
[ef83ff50] [c017eab0] phy_state_machine+0xd4/0x5b8
[ef83ff70] [c0037570] worker_thread+0x124/0x1b8
[ef83ffc0] [c003b5fc] kthread+0x78/0x7c
[ef83fff0] [c000f584] kernel_thread+0x4c/0x68

Can you reproduce this ?

Thanks a lot for your help.

Felix.