[PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

STALE6161d

8 messages, 5 authors, 2009-10-17 · open the first message on its own page

[PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Randy Dunlap <hidden>
Date: 2009-10-15 22:30:10

From: Randy Dunlap <redacted>

vmxnet3 was using dprintk() for debugging output.  This was
defined in <linux/dst.h> and was the only thing that was
used from that header file.  This caused compile errors
when CONFIG_BLOCK was not enabled due to bio* and BIO*
uses in the header file, so change this driver to use
dev_dbg() for debugging output.

include/linux/dst.h:520: error: dereferencing pointer to incomplete type
include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use in this function)
include/linux/dst.h:521: error: dereferencing pointer to incomplete type
include/linux/dst.h:522: error: dereferencing pointer to incomplete type
include/linux/dst.h:525: error: dereferencing pointer to incomplete type
make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1

Signed-off-by: Randy Dunlap <redacted>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |   27 ++++++++++++++++++---------
 drivers/net/vmxnet3/vmxnet3_int.h |    2 +-
 2 files changed, 19 insertions(+), 10 deletions(-)
--- linux-next-20091015.orig/drivers/net/vmxnet3/vmxnet3_int.h
+++ linux-next-20091015/drivers/net/vmxnet3/vmxnet3_int.h
@@ -30,6 +30,7 @@
 #include <linux/types.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/pci.h>
 #include <linux/ethtool.h>
@@ -59,7 +60,6 @@
 #include <linux/if_vlan.h>
 #include <linux/if_arp.h>
 #include <linux/inetdevice.h>
-#include <linux/dst.h>
 
 #include "vmxnet3_defs.h"
 
--- linux-next-20091015.orig/drivers/net/vmxnet3/vmxnet3_drv.c
+++ linux-next-20091015/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -481,7 +481,8 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_r
 	}
 	rq->uncommitted[ring_idx] += num_allocated;
 
-	dprintk(KERN_ERR "alloc_rx_buf: %d allocated, next2fill %u, next2comp "
+	dev_dbg(&adapter->netdev->dev,
+		"alloc_rx_buf: %d allocated, next2fill %u, next2comp "
 		"%u, uncommited %u\n", num_allocated, ring->next2fill,
 		ring->next2comp, rq->uncommitted[ring_idx]);
 
@@ -539,7 +540,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		tbi = tq->buf_info + tq->tx_ring.next2fill;
 		tbi->map_type = VMXNET3_MAP_NONE;
 
-		dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
 			tq->tx_ring.next2fill, ctx->sop_txd->txd.addr,
 			ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -572,7 +574,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		gdesc->dword[2] = dw2 | buf_size;
 		gdesc->dword[3] = 0;
 
-		dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
 			tq->tx_ring.next2fill, gdesc->txd.addr,
 			gdesc->dword[2], gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -600,7 +603,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		gdesc->dword[2] = dw2 | frag->size;
 		gdesc->dword[3] = 0;
 
-		dprintk(KERN_ERR "txd[%u]: 0x%llu %u %u\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%llu %u %u\n",
 			tq->tx_ring.next2fill, gdesc->txd.addr,
 			gdesc->dword[2], gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -697,7 +701,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buf
 	tdd = tq->data_ring.base + tq->tx_ring.next2fill;
 
 	memcpy(tdd->data, skb->data, ctx->copy_size);
-	dprintk(KERN_ERR "copy %u bytes to dataRing[%u]\n",
+	dev_dbg(&adapter->netdev->dev,
+		"copy %u bytes to dataRing[%u]\n",
 		ctx->copy_size, tq->tx_ring.next2fill);
 	return 1;
 
@@ -808,7 +813,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str
 
 	if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
 		tq->stats.tx_ring_full++;
-		dprintk(KERN_ERR "tx queue stopped on %s, next2comp %u"
+		dev_dbg(&adapter->netdev->dev,
+			"tx queue stopped on %s, next2comp %u"
 			" next2fill %u\n", adapter->netdev->name,
 			tq->tx_ring.next2comp, tq->tx_ring.next2fill);
 
@@ -853,7 +859,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str
 
 	/* finally flips the GEN bit of the SOP desc */
 	gdesc->dword[2] ^= VMXNET3_TXD_GEN;
-	dprintk(KERN_ERR "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
+	dev_dbg(&adapter->netdev->dev,
+		"txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
 		(u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd -
 		tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2],
 		gdesc->dword[3]);
@@ -990,7 +997,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx
 			if (unlikely(rcd->len == 0)) {
 				/* Pretend the rx buffer is skipped. */
 				BUG_ON(!(rcd->sop && rcd->eop));
-				dprintk(KERN_ERR "rxRing[%u][%u] 0 length\n",
+				dev_dbg(&adapter->netdev->dev,
+					"rxRing[%u][%u] 0 length\n",
 					ring_idx, idx);
 				goto rcd_done;
 			}
@@ -1676,7 +1684,8 @@ vmxnet3_activate_dev(struct vmxnet3_adap
 	int err;
 	u32 ret;
 
-	dprintk(KERN_ERR "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
+	dev_dbg(&adapter->netdev->dev,
+		"%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
 		" %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size,
 		adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size,
 		adapter->rx_queue.rx_ring[0].size,

RE: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Bhavesh Davda <hidden>
Date: 2009-10-15 22:35:43

Who ever compiles with CONFIG_BLOCK=n? Just kidding...

Thanks again for making this change! Ship it!

Signed-off-by: Bhavesh Davda <redacted>

- Bhavesh
quoted hunk
-----Original Message-----
From: pv-drivers-bounces@vmware.com [mailto:pv-drivers-
bounces@vmware.com] On Behalf Of Randy Dunlap
Sent: Thursday, October 15, 2009 3:30 PM
To: Stephen Rothwell
Cc: pv-drivers@vmware.com; netdev; LKML; linux-next@vger.kernel.org;
David Miller
Subject: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for
CONFIG_BLOCK=n

From: Randy Dunlap <redacted>

vmxnet3 was using dprintk() for debugging output.  This was
defined in <linux/dst.h> and was the only thing that was
used from that header file.  This caused compile errors
when CONFIG_BLOCK was not enabled due to bio* and BIO*
uses in the header file, so change this driver to use
dev_dbg() for debugging output.

include/linux/dst.h:520: error: dereferencing pointer to incomplete
type
include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use
in this function)
include/linux/dst.h:521: error: dereferencing pointer to incomplete
type
include/linux/dst.h:522: error: dereferencing pointer to incomplete
type
include/linux/dst.h:525: error: dereferencing pointer to incomplete
type
make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1

Signed-off-by: Randy Dunlap <redacted>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |   27 ++++++++++++++++++---------
 drivers/net/vmxnet3/vmxnet3_int.h |    2 +-
 2 files changed, 19 insertions(+), 10 deletions(-)
--- linux-next-20091015.orig/drivers/net/vmxnet3/vmxnet3_int.h
+++ linux-next-20091015/drivers/net/vmxnet3/vmxnet3_int.h
@@ -30,6 +30,7 @@
 #include <linux/types.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/pci.h>
 #include <linux/ethtool.h>
@@ -59,7 +60,6 @@
 #include <linux/if_vlan.h>
 #include <linux/if_arp.h>
 #include <linux/inetdevice.h>
-#include <linux/dst.h>

 #include "vmxnet3_defs.h"

--- linux-next-20091015.orig/drivers/net/vmxnet3/vmxnet3_drv.c
+++ linux-next-20091015/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -481,7 +481,8 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_r
 	}
 	rq->uncommitted[ring_idx] += num_allocated;

-	dprintk(KERN_ERR "alloc_rx_buf: %d allocated, next2fill %u,
next2comp "
+	dev_dbg(&adapter->netdev->dev,
+		"alloc_rx_buf: %d allocated, next2fill %u, next2comp "
 		"%u, uncommited %u\n", num_allocated, ring->next2fill,
 		ring->next2comp, rq->uncommitted[ring_idx]);
@@ -539,7 +540,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		tbi = tq->buf_info + tq->tx_ring.next2fill;
 		tbi->map_type = VMXNET3_MAP_NONE;

-		dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
 			tq->tx_ring.next2fill, ctx->sop_txd->txd.addr,
 			ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -572,7 +574,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		gdesc->dword[2] = dw2 | buf_size;
 		gdesc->dword[3] = 0;

-		dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
 			tq->tx_ring.next2fill, gdesc->txd.addr,
 			gdesc->dword[2], gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -600,7 +603,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		gdesc->dword[2] = dw2 | frag->size;
 		gdesc->dword[3] = 0;

-		dprintk(KERN_ERR "txd[%u]: 0x%llu %u %u\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%llu %u %u\n",
 			tq->tx_ring.next2fill, gdesc->txd.addr,
 			gdesc->dword[2], gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -697,7 +701,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buf
 	tdd = tq->data_ring.base + tq->tx_ring.next2fill;

 	memcpy(tdd->data, skb->data, ctx->copy_size);
-	dprintk(KERN_ERR "copy %u bytes to dataRing[%u]\n",
+	dev_dbg(&adapter->netdev->dev,
+		"copy %u bytes to dataRing[%u]\n",
 		ctx->copy_size, tq->tx_ring.next2fill);
 	return 1;
@@ -808,7 +813,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str

 	if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
 		tq->stats.tx_ring_full++;
-		dprintk(KERN_ERR "tx queue stopped on %s, next2comp %u"
+		dev_dbg(&adapter->netdev->dev,
+			"tx queue stopped on %s, next2comp %u"
 			" next2fill %u\n", adapter->netdev->name,
 			tq->tx_ring.next2comp, tq->tx_ring.next2fill);
@@ -853,7 +859,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str

 	/* finally flips the GEN bit of the SOP desc */
 	gdesc->dword[2] ^= VMXNET3_TXD_GEN;
-	dprintk(KERN_ERR "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
+	dev_dbg(&adapter->netdev->dev,
+		"txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
 		(u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd -
 		tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2],
 		gdesc->dword[3]);
@@ -990,7 +997,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx
 			if (unlikely(rcd->len == 0)) {
 				/* Pretend the rx buffer is skipped. */
 				BUG_ON(!(rcd->sop && rcd->eop));
-				dprintk(KERN_ERR "rxRing[%u][%u] 0 length\n",
+				dev_dbg(&adapter->netdev->dev,
+					"rxRing[%u][%u] 0 length\n",
 					ring_idx, idx);
 				goto rcd_done;
 			}
@@ -1676,7 +1684,8 @@ vmxnet3_activate_dev(struct vmxnet3_adap
 	int err;
 	u32 ret;

-	dprintk(KERN_ERR "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring
sizes"
+	dev_dbg(&adapter->netdev->dev,
+		"%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
 		" %u %u %u\n", adapter->netdev->name, adapter-
quoted
skb_buf_size,
 		adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size,
 		adapter->rx_queue.rx_ring[0].size,
_______________________________________________
Pv-drivers mailing list
Pv-drivers@vmware.com
http://mailman2.vmware.com/mailman/listinfo/pv-drivers

RE: [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Shreyas Bhatewara <hidden>
Date: 2009-10-15 22:38:05

-----Original Message-----
From: Randy Dunlap [mailto:randy.dunlap@oracle.com]
Sent: Thursday, October 15, 2009 3:30 PM
To: Stephen Rothwell
Cc: linux-next@vger.kernel.org; LKML; netdev; David Miller; Shreyas
Bhatewara; pv-drivers@vmware.com
Subject: [PATCH -next] vmxnet3: use dev_dbg, fix build for
CONFIG_BLOCK=n

From: Randy Dunlap <redacted>

vmxnet3 was using dprintk() for debugging output.  This was
defined in <linux/dst.h> and was the only thing that was
used from that header file.  This caused compile errors
when CONFIG_BLOCK was not enabled due to bio* and BIO*
uses in the header file, so change this driver to use
dev_dbg() for debugging output.

include/linux/dst.h:520: error: dereferencing pointer to incomplete
type
include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use
in this function)
include/linux/dst.h:521: error: dereferencing pointer to incomplete
type
include/linux/dst.h:522: error: dereferencing pointer to incomplete
type
include/linux/dst.h:525: error: dereferencing pointer to incomplete
type
make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1

Signed-off-by: Randy Dunlap <redacted>

Thanks for the changes Randy, appreciate it.

->Shreyas

Re: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Randy Dunlap <hidden>
Date: 2009-10-15 22:42:56

Bhavesh Davda wrote:
Who ever compiles with CONFIG_BLOCK=n? Just kidding...
or why does networking need CONFIG_BLOCK at all?  ;)
Thanks again for making this change! Ship it!
So could I have used adapter->netdev->dev or adapter->pdev->dev ?
either of them?  are they the same?

Signed-off-by: Bhavesh Davda <redacted>

- Bhavesh
quoted
-----Original Message-----
From: pv-drivers-bounces@vmware.com [mailto:pv-drivers-
bounces@vmware.com] On Behalf Of Randy Dunlap
Sent: Thursday, October 15, 2009 3:30 PM
To: Stephen Rothwell
Cc: pv-drivers@vmware.com; netdev; LKML; linux-next@vger.kernel.org;
David Miller
Subject: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for
CONFIG_BLOCK=n

From: Randy Dunlap <redacted>

vmxnet3 was using dprintk() for debugging output.  This was
defined in <linux/dst.h> and was the only thing that was
used from that header file.  This caused compile errors
when CONFIG_BLOCK was not enabled due to bio* and BIO*
uses in the header file, so change this driver to use
dev_dbg() for debugging output.

include/linux/dst.h:520: error: dereferencing pointer to incomplete
type
include/linux/dst.h:520: error: 'BIO_POOL_BITS' undeclared (first use
in this function)
include/linux/dst.h:521: error: dereferencing pointer to incomplete
type
include/linux/dst.h:522: error: dereferencing pointer to incomplete
type
include/linux/dst.h:525: error: dereferencing pointer to incomplete
type
make[4]: *** [drivers/net/vmxnet3/vmxnet3_drv.o] Error 1

Signed-off-by: Randy Dunlap <redacted>
---
 drivers/net/vmxnet3/vmxnet3_drv.c |   27 ++++++++++++++++++---------
 drivers/net/vmxnet3/vmxnet3_int.h |    2 +-
 2 files changed, 19 insertions(+), 10 deletions(-)
--- linux-next-20091015.orig/drivers/net/vmxnet3/vmxnet3_int.h
+++ linux-next-20091015/drivers/net/vmxnet3/vmxnet3_int.h
@@ -30,6 +30,7 @@
 #include <linux/types.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
+#include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/pci.h>
 #include <linux/ethtool.h>
@@ -59,7 +60,6 @@
 #include <linux/if_vlan.h>
 #include <linux/if_arp.h>
 #include <linux/inetdevice.h>
-#include <linux/dst.h>

 #include "vmxnet3_defs.h"

--- linux-next-20091015.orig/drivers/net/vmxnet3/vmxnet3_drv.c
+++ linux-next-20091015/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -481,7 +481,8 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_r
 	}
 	rq->uncommitted[ring_idx] += num_allocated;

-	dprintk(KERN_ERR "alloc_rx_buf: %d allocated, next2fill %u,
next2comp "
+	dev_dbg(&adapter->netdev->dev,
+		"alloc_rx_buf: %d allocated, next2fill %u, next2comp "
 		"%u, uncommited %u\n", num_allocated, ring->next2fill,
 		ring->next2comp, rq->uncommitted[ring_idx]);
@@ -539,7 +540,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		tbi = tq->buf_info + tq->tx_ring.next2fill;
 		tbi->map_type = VMXNET3_MAP_NONE;

-		dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
 			tq->tx_ring.next2fill, ctx->sop_txd->txd.addr,
 			ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -572,7 +574,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		gdesc->dword[2] = dw2 | buf_size;
 		gdesc->dword[3] = 0;

-		dprintk(KERN_ERR "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
 			tq->tx_ring.next2fill, gdesc->txd.addr,
 			gdesc->dword[2], gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -600,7 +603,8 @@ vmxnet3_map_pkt(struct sk_buff *skb, str
 		gdesc->dword[2] = dw2 | frag->size;
 		gdesc->dword[3] = 0;

-		dprintk(KERN_ERR "txd[%u]: 0x%llu %u %u\n",
+		dev_dbg(&adapter->netdev->dev,
+			"txd[%u]: 0x%llu %u %u\n",
 			tq->tx_ring.next2fill, gdesc->txd.addr,
 			gdesc->dword[2], gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
@@ -697,7 +701,8 @@ vmxnet3_parse_and_copy_hdr(struct sk_buf
 	tdd = tq->data_ring.base + tq->tx_ring.next2fill;

 	memcpy(tdd->data, skb->data, ctx->copy_size);
-	dprintk(KERN_ERR "copy %u bytes to dataRing[%u]\n",
+	dev_dbg(&adapter->netdev->dev,
+		"copy %u bytes to dataRing[%u]\n",
 		ctx->copy_size, tq->tx_ring.next2fill);
 	return 1;
@@ -808,7 +813,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str

 	if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
 		tq->stats.tx_ring_full++;
-		dprintk(KERN_ERR "tx queue stopped on %s, next2comp %u"
+		dev_dbg(&adapter->netdev->dev,
+			"tx queue stopped on %s, next2comp %u"
 			" next2fill %u\n", adapter->netdev->name,
 			tq->tx_ring.next2comp, tq->tx_ring.next2fill);
@@ -853,7 +859,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, str

 	/* finally flips the GEN bit of the SOP desc */
 	gdesc->dword[2] ^= VMXNET3_TXD_GEN;
-	dprintk(KERN_ERR "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
+	dev_dbg(&adapter->netdev->dev,
+		"txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
 		(u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd -
 		tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2],
 		gdesc->dword[3]);
@@ -990,7 +997,8 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx
 			if (unlikely(rcd->len == 0)) {
 				/* Pretend the rx buffer is skipped. */
 				BUG_ON(!(rcd->sop && rcd->eop));
-				dprintk(KERN_ERR "rxRing[%u][%u] 0 length\n",
+				dev_dbg(&adapter->netdev->dev,
+					"rxRing[%u][%u] 0 length\n",
 					ring_idx, idx);
 				goto rcd_done;
 			}
@@ -1676,7 +1684,8 @@ vmxnet3_activate_dev(struct vmxnet3_adap
 	int err;
 	u32 ret;

-	dprintk(KERN_ERR "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring
sizes"
+	dev_dbg(&adapter->netdev->dev,
+		"%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
 		" %u %u %u\n", adapter->netdev->name, adapter-
quoted
skb_buf_size,
 		adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size,
 		adapter->rx_queue.rx_ring[0].size,
_______________________________________________

Re: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Dmitry Torokhov <hidden>
Date: 2009-10-15 22:48:26

Hi Randy,

On Thursday 15 October 2009 03:42:49 pm Randy Dunlap wrote:
Bhavesh Davda wrote:
quoted
Who ever compiles with CONFIG_BLOCK=n? Just kidding...
or why does networking need CONFIG_BLOCK at all?  ;)
quoted
Thanks again for making this change! Ship it!
So could I have used adapter->netdev->dev or adapter->pdev->dev ?
either of them?  are they the same?
They are the same.

-- 
Dmitry

Re: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Dmitry Torokhov <hidden>
Date: 2009-10-15 22:53:55

On Thursday 15 October 2009 03:47:48 pm Dmitry Torokhov wrote:
Hi Randy,

On Thursday 15 October 2009 03:42:49 pm Randy Dunlap wrote:
quoted
Bhavesh Davda wrote:
quoted
Who ever compiles with CONFIG_BLOCK=n? Just kidding...
or why does networking need CONFIG_BLOCK at all?  ;)
quoted
Thanks again for making this change! Ship it!
So could I have used adapter->netdev->dev or adapter->pdev->dev ?
either of them?  are they the same?
They are the same.
Hmm.. I take this back, adapter->netdev->dev.parent == adapter->pdev->dev.

-- 
Dmitry

RE: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: Bhavesh Davda <hidden>
Date: 2009-10-15 22:54:13

From: Dmitry Torokhov [mailto:dtor@vmware.com]
Sent: Thursday, October 15, 2009 3:48 PM
To: pv-drivers@vmware.com
Cc: Randy Dunlap; Bhavesh Davda; Stephen Rothwell; netdev; LKML; linux-
next@vger.kernel.org; David Miller
Subject: Re: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build
for CONFIG_BLOCK=n

Hi Randy,

On Thursday 15 October 2009 03:42:49 pm Randy Dunlap wrote:
quoted
Bhavesh Davda wrote:
quoted
Who ever compiles with CONFIG_BLOCK=n? Just kidding...
or why does networking need CONFIG_BLOCK at all?  ;)
quoted
Thanks again for making this change! Ship it!
So could I have used adapter->netdev->dev or adapter->pdev->dev ?
either of them?  are they the same?
They are the same.

Right:

vmxnet3_probe_device(struct pci_dev *pdev,...)

	struct net_device *netdev;
	...
	netdev = alloc_etherdev(sizeof(struct vmxnet3_adapter));
	...
	pci_set_drvdata(pdev, netdev);
	adapter = netdev_priv(netdev);
	adapter->netdev = netdev;
	adapter->pdev = pdev;

- Bhavesh

Re: [Pv-drivers] [PATCH -next] vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n

From: David Miller <davem@davemloft.net>
Date: 2009-10-17 00:53:53

From: Bhavesh Davda <redacted>
Date: Thu, 15 Oct 2009 15:35:02 -0700
Who ever compiles with CONFIG_BLOCK=n? Just kidding...
Who ever uses block layer debugging facilities in a networking
driver?
Thanks again for making this change! Ship it!

Signed-off-by: Bhavesh Davda <redacted>
Applied, thanks everyone.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help