On 10/28/2009 12:50 PM, Patrick McHardy wrote:

quoted

And, even 1MB may not be enough for some scenarios.  So, probably best to
let users over-ride the initial setting on cmd-line.  If not, then use
a large value to start with.

How about this? It uses 1MB as receive buf limit by default (without
increasing /proc/sys/net/core/rmem_max it will be limited by less
however) and allows to specify the size manually using "-rcvbuf X"
(-r is already used, so you need to specify at least -rc).

Additionally rtnl_listen() continues on ENOBUFS after printing the
error message.

Looks good..except:

If rmem_max is smaller than 1M, will that cause setsocktopt to
fail and thus fail early out of rtnl_open_byproto?

Maybe we should only print errors but not return in that method
when setsockopt fails?

In another project, I ended up trying ever smaller values until one
worked in order to get near what the user wanted even if rmem_max
was configured smaller.  Not sure if that is worth doing here or not.

Thanks,
Ben

-- 
Ben Greear [off-list ref]
Candela Technologies Inc  http://www.candelatech.com