Re: [PATCH] iputils: ping by mark
From: jamal <hidden>
Date: 2009-10-17 23:37:46
On Sat, 2009-10-17 at 19:04 -0400, jamal wrote:
This patch has worked fine in 2.6.31 and pre-31 where i tested.
Ok, just to be sure - here's a simple test i just did on my laptop...
------
hadi@dogo:~$ uname -a
Linux dogo 2.6.31-rc7-00001-g6da17c5-dirty #7 PREEMPT Thu Oct 15
16:35:13 EDT 2009 i686 GNU/Linux
hadi@dogo:~$ ip a ls dev eth0
11: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UNKNOWN qlen 1000
link/ether 00:0b:97:97:4d:6a brd ff:ff:ff:ff:ff:ff
inet 10.0.0.31/24 brd 10.0.0.255 scope global eth0
inet 10.0.0.2/32 scope global eth0
inet6 fe80::20b:97ff:fe97:4d6a/64 scope link
valid_lft forever preferred_lft forever
hadi@dogo:~$ ip ru ls
0: from all lookup local
15: from all fwmark 0xf lookup 15
16: from all fwmark 0x10 lookup 16
32766: from all lookup main
32767: from all lookup default
hadi@dogo:~$ ip r ls table 15
208.67.217.231 via 10.0.0.1 dev eth0 src 10.0.0.31
hadi@dogo:~$ ip r ls table 16
208.67.217.231 via 10.0.0.1 dev eth0 src 10.0.0.2
hadi@dogo:~$
One ping with -m 15 -c1 to 208.67.217.231, tcpdump:
19:22:09.467555 IP 10.0.0.31 > 208.67.217.231: ICMP echo request, id
34328, seq 1, length 64
19:22:09.535429 IP 208.67.217.231 > 10.0.0.31: ICMP echo reply, id
34328, seq 1, length 64
repeat ping with -m 16 and watch tcpdump
19:23:19.731592 IP 10.0.0.2 > 208.67.217.231: ICMP echo request, id
50712, seq 1, length 64
19:23:19.790672 IP 208.67.217.231 > 10.0.0.2: ICMP echo reply, id 50712,
seq 1, length 64
------
I have also tried it with udp (hacked netcat) and i dont see any problem
either
What did i miss?
cheers,
jamal