[PATCH 3/3] sfc: 10Xpress: Initialise pause advertising flags
From: Ben Hutchings <hidden>
Date: 2009-10-12 19:27:28
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The mdio module now handles reconfiguration of pause advertising through ethtool, but not initialisation. Add the necessary initialisation to tenxpress_phy_init(). Signed-off-by: Ben Hutchings <redacted> --- drivers/net/sfc/tenxpress.c | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index f4d5090..1a3495c 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c@@ -301,6 +301,7 @@ static int tenxpress_init(struct efx_nic *efx) static int tenxpress_phy_init(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data; + u16 old_adv, adv; int rc = 0; phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
@@ -333,6 +334,15 @@ static int tenxpress_phy_init(struct efx_nic *efx) if (rc < 0) goto fail; + /* Set pause advertising */ + old_adv = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE); + adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) | + mii_advertise_flowctrl(efx->wanted_fc)); + if (adv != old_adv) { + efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, adv); + mdio45_nway_restart(&efx->mdio); + } + if (efx->phy_type == PHY_TYPE_SFT9001B) { rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_short_reach);
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.