[PATCH 1/3] mdio: Advertise pause (flow control) settings even if autoneg is off
flat view
STALE6206d
From: Ben Hutchings <hidden>
Date: 2009-10-12 19:26:57
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Currently, if pause autoneg is off we do not set either pause advertising flag. If autonegotiation of speed and duplex settings is enabled, there is no way for the link partner to distinguish this from our refusing to use pause frames. We should instead set the advertising flags according to the forced mode so that the link partner can follow our lead. This is consistent with the behaviour of other drivers. Signed-off-by: Ben Hutchings <redacted> --- drivers/net/mdio.c | 8 +++----- 1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index 21f8754..c0db9d7 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c@@ -344,11 +344,9 @@ void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio, old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, MDIO_AN_ADVERTISE); - adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); - if (ecmd->autoneg) - adv |= mii_advertise_flowctrl( - (ecmd->rx_pause ? FLOW_CTRL_RX : 0) | - (ecmd->tx_pause ? FLOW_CTRL_TX : 0)); + adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) | + mii_advertise_flowctrl((ecmd->rx_pause ? FLOW_CTRL_RX : 0) | + (ecmd->tx_pause ? FLOW_CTRL_TX : 0))); if (adv != old_adv) { mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN, MDIO_AN_ADVERTISE, adv);
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.