[PATCH 1/3] phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
From: Anton Vorontsov <hidden>
Date: 2009-09-10 02:01:33
Also in:
linuxppc-dev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
According to specs, when auto-negotiation is disabled, Marvell PHYs need a software reset after changing speed/duplex forcing bits. Otherwise, the modified bits have no effect. Signed-off-by: Anton Vorontsov <redacted> --- drivers/net/phy/marvell.c | 21 ++++++++++++++++++++- 1 files changed, 20 insertions(+), 1 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index dd6f54d..6f69b9b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c@@ -155,8 +155,27 @@ static int marvell_config_aneg(struct phy_device *phydev) return err; err = genphy_config_aneg(phydev); + if (err < 0) + return err; - return err; + if (phydev->autoneg != AUTONEG_ENABLE) { + int bmcr; + + /* + * A write to speed/duplex bits (that is performed by + * genphy_config_aneg() call above) must be followed by + * a software reset. Otherwise, the write has no effect. + */ + bmcr = phy_read(phydev, MII_BMCR); + if (bmcr < 0) + return bmcr; + + err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET); + if (err < 0) + return err; + } + + return 0; } static int m88e1121_config_aneg(struct phy_device *phydev)
--
1.6.3.3