(unknown)

Hi,

This patch series adds support for the Atmel CAN controller as found
on the AT91SAM9263.

It adds the at91_can to the generic device definition, activates the CAN
controller on the at91sam9263ek and adds the driver itself.

Changes since V1:
- let Kconfig depend on CAN_DEV
- add example how driver is used in baord file

Please review and consider for inclusion.

cheers, Marc

Marc Kleine-Budde (3):
      at91sam9263: add at91_can device to generic device definition
      at91sam9263ek: activate at91 CAN controller
      at91_can: add driver for Atmel's CAN controller on AT91SAM9263

 arch/arm/mach-at91/at91sam9263_devices.c |   36 +
 arch/arm/mach-at91/board-sam9263ek.c     |   19 +
 arch/arm/mach-at91/include/mach/board.h  |    6 +
 drivers/net/can/Kconfig                  |    6 +
 drivers/net/can/Makefile                 |    1 +
 drivers/net/can/at91_can.c               | 1186 ++++++++++++++++++++++++++++++
 6 files changed, 1254 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/can/at91_can.c