From: Neil Horman <nhorman@tuxdriver.com>
Date: Sun, 26 Jul 2009 20:36:09 -0400

	Since Network devices dma their memory into a provided DMA
buffer (which can usually be at an arbitrary location, as they must
cross potentially several pci busses to reach any memory location),
I'm postulating that it would increase our receive path efficiency
to provide a hint to the driver layer as to which node to allocate
an skb data buffer on.  This hint would be determined by a feedback
mechanism.  I was thinking that we could provide a callback function
via the skb, that accepted the skb and the originating net_device.
This callback can track statistics on which numa nodes consume
(read: copy data from) skbs that were produced by specific net
devices.  Then, when in the future that netdevice allocates a new
skb (perhaps via netdev_alloc_skb), we can use that statistical
profile to determine if the data buffer should be allocated on the
local node, or on a remote node instead.

No matter what, you will do an inter-node memory operation.

Unless, the consumer NUMA node is the same as the one the
device is on.

Because since the device is on a NUMA node, if you DMA remotely
you've eaten the NUMA cost already.

If you always DMA to the device's NUMA node (what we try to do now) at
least the is the possibility of eliminating cross-NUMA traffic.

Better to move the application or stack processing towards the NUMA
node the network device is on, I think.