[PATCH 4/5] mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization
From: Yevgeny Petrilin <hidden>
Date: 2009-04-20 14:34:18
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The former usage was to set the NETIF_F_HW_CSUM flag which is not used in get_tx_csum. It caused Ethtool to show tx checksum as "on" even though it was turned off in previous operation. Signed-off-by: Yevgeny Petrilin <redacted> --- drivers/net/mlx4/en_netdev.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 09fb7cf..438678a 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c@@ -1057,7 +1057,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, * Set driver features */ dev->features |= NETIF_F_SG; - dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
--
1.5.4