Re: [PATCH 5/5] net: make mpc5200 fec driver use of_mdio infrastructure

On Tue, Mar 10, 2009 at 2:29 PM, Anton Vorontsov
[off-list ref] wrote:

On Tue, Mar 10, 2009 at 01:48:26PM -0600, Grant Likely wrote:

quoted

Regardless, I
think all the drivers should be using common code for obtaining the
phy_device from the device tree.

Not necessary `struct phy_device'. All we need is some common
routine for translating PHY's "mdio_node->full_name + phy id" to
phy_bus_id.

This only works if the network driver knows how the MDIO bus is named.
 The current code assumes that the MDIO bus name is the register
address, but this is a driver implementation detail and MDIO bus
drivers can deviate from this.  What about MDIO busses that don't have
a reg property?  For example, fs_enet/mii-bitbang.c sets the bus name
to "CPM2 Bitbanged MII".  There is no one-size-fits-all way to figure
out the phy bus id from the ethernet driver side of things.

The sure and simple way to guarantee a match between the PHY device
node and the phy_device is to use the PHY device_node pointer itself
as the search key.

I concede that my first attempt at this was overly complex, but I've
reworked the code and I think it makes thinks considerably simpler.
I'll post a new series tomorrow.  I've got patches to make the
ucc_eth, gianfar and fs_enet drivers to use the device_node method
also.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.