Re: [PATCH] r8169: Fix irq masking in rtl8169_interrupt()

Only adjust the NAPI bits of the interruptmask, if netif_rx_schedule_prep()
returns true.
Without this, I see interrupt storms here using 2.6.29-rcx and 2.6.27.19 and
device needed rmmod r8169 + modprobe r8169 to start working.

Signed-off-by: Karsten Wiese <redacted>
---
 drivers/net/r8169.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b347340..0c943ba 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c

@@ -3708,12 +3708,11 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 		rtl8169_check_link_status(dev, tp, ioaddr);
 
 	if (status & tp->napi_event) {
-		RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
-		tp->intr_mask = ~tp->napi_event;
-
-		if (likely(netif_rx_schedule_prep(&tp->napi)))
+		if (likely(netif_rx_schedule_prep(&tp->napi))) {
+			RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+			tp->intr_mask = ~tp->napi_event;
 			__netif_rx_schedule(&tp->napi);
-		else if (netif_msg_intr(tp)) {
+		} else if (netif_msg_intr(tp)) {
 			printk(KERN_INFO "%s: interrupt %04x in poll\n",