[PATCH] fec: replace flush_dcache_range with dma_sync_single
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2009-01-29 09:05:50
Subsystem:
networking drivers, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
flush_dcache_range is not portable across architectures. Use dma_sync_single instead. Also, the memory must be synchronised in the receive path aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Greg Ungerer <redacted> --- drivers/net/fec.c | 7 +++++-- 1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index cab07ec..a17dc6a 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c@@ -356,8 +356,8 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Push the data cache so the CPM does not get stale memory * data. */ - flush_dcache_range((unsigned long)skb->data, - (unsigned long)skb->data + skb->len); + dma_sync_single(NULL, bdp->cbd_bufaddr, + bdp->cbd_datlen, DMA_TO_DEVICE); /* Send it on its way. Tell FEC it's ready, interrupt when done, * it's the last BD of the frame, and to put the CRC on the end.
@@ -630,6 +630,9 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { dev->stats.rx_bytes += pkt_len; data = (__u8*)__va(bdp->cbd_bufaddr); + dma_sync_single(NULL, (unsigned long)__pa(data), + pkt_len - 4, DMA_FROM_DEVICE); + /* This does 16 byte alignment, exactly what we need. * The packet length includes FCS, but we don't want to * include that when passing upstream as it messes up
--
1.5.6.5