@@ -31,3 +31,8 @@ config WIMAX_DEBUG_LEVEL
 
          It is recommended that it is left at 8.
 
+if WIMAX
+
+source "drivers/net/wimax/i2400m/Kconfig"
+
+endif

@@ -1,4 +1,5 @@
 
+obj-$(CONFIG_WIMAX_I2400M)	+= i2400m/
 obj-$(CONFIG_WIMAX)		+= wimax.o
 
 wimax-objs :=		\

@@ -0,0 +1,49 @@
+
+config WIMAX_I2400M
+        tristate
+	depends on WIMAX
+        select FW_LOADER
+
+comment "Enable USB support to see USB drivers"
+        depends on !USB
+
+comment "Enable MMC support to see SDIO drivers"
+        depends on !MMC
+
+config WIMAX_I2400M_USB
+	tristate "Support for Intel Wireless WiMAX Connection 2400 over USB (eg: 5x50)"
+	depends on WIMAX && USB
+        select WIMAX_I2400M
+	help
+	  Select if you have a device based on the Intel WiMAX
+	  Connection 2400 over USB (like any of the Intel 5x50
+	  Wireless Wifi/WiMAX Link series).
+
+          If unsure, it is safe to select M (module).
+
+config WIMAX_I2400M_SDIO
+	tristate "Support for Intel Wireless WiMAX Connection 2400 over SDIO"
+	depends on WIMAX && MMC
+        select WIMAX_I2400M
+	help
+	  Select if you have a device based on the Intel WiMAX
+	  Connection 2400 over SDIO.
+
+          If unsure, it is safe to select M (module).
+
+config WIMAX_I2400M_DEBUG_LEVEL
+       int "WiMAX i2400m debug level"
+       depends on WIMAX_I2400M
+       default 8
+       help
+
+         Select the maximum debug verbosity level to be compiled into
+         the WiMAX i2400m driver code.
+
+         By default, this is disabled at runtime and can be
+         selectively enabled at runtime for different parts of the
+         code using the sysfs debug-levels file.
+
+         If set at zero, this will compile out all the debug code.
+
+         It is recommended that it is left at 8.

@@ -0,0 +1,28 @@
+
+obj-$(CONFIG_WIMAX_I2400M) += i2400m.o
+obj-$(CONFIG_WIMAX_I2400M_USB) += i2400m-usb.o
+obj-$(CONFIG_WIMAX_I2400M_SDIO) += i2400m-sdio.o
+
+i2400m-objs :=		\
+	control.o	\
+	driver.o	\
+	fw.o		\
+	op-rfkill.o	\
+	sysfs.o		\
+	netdev.o	\
+	tx.o		\
+	rx.o
+
+i2400m-usb-objs :=		\
+	usb-fw.o		\
+	usb-notif.o		\
+	usb-tx.o		\
+	usb-rx.o		\
+	usb.o
+
+
+i2400m-sdio-objs := 		\
+	sdio.o      		\
+	sdio-tx.o   		\
+	sdio-fw.o	 	\
+	sdio-rx.o