Re: [PATCH diagnostic] Re: HPET regression in 2.6.26 versus 2.6.25 -- RCU problem
From: Paul E. McKenney <hidden>
Date: 2008-08-11 01:38:21
Also in:
lkml
On Sun, Aug 10, 2008 at 06:35:38PM -0700, Paul E. McKenney wrote:
On Sun, Aug 10, 2008 at 08:15:20AM -0700, Paul E. McKenney wrote:quoted
I will see about putting together a diagnostic patch for Classic RCU. The approach will be to record jiffies (or some such) at the beginning of the grace period (in rcu_start_batch()), then have rcu_check_callbacks() complain if: 1. it is running on a CPU that has holding up grace periods for a long time (say one second). This will identify the culprit assuming that the culprit has not disabled hardware irqs, instruction execution, or some such. 2. it is running on a CPU that is not holding up grace periods, but grace periods have been held up for an even longer time (say two seconds). In either case, some sort of exponential backoff would be needed to avoid multi-gigabyte log files. Of course, all of this assumes that the machine remains healthy enough to actually get any such messages somewhere that you can see them, but so it goes...
And attached is the kernel module I used to test the patch, for whatever that might be worth. Thanx, Paul
quoted hunk ↗ jump to hunk
And here is the patch. It is still a bit raw, so the results should be viewed with some suspicion. It adds a default-off kernel parameter CONFIG_RCU_CPU_STALL which must be enabled. Rather than exponential backoff, it backs off to once per 30 seconds. My feeling upon thinking on it was that if you have stalled RCU grace periods for that long, a few extra printk() messages are probably the least of your worries... Signed-off-by: Paul E. McKenney <redacted> --- include/linux/rcuclassic.h | 3 + kernel/rcuclassic.c | 80 +++++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 13 +++++++ 3 files changed, 96 insertions(+) diff -urpNa -X dontdiff linux-2.6.27-rc1/include/linux/rcuclassic.h linux-2.6.27-rc1-cpustall/include/linux/rcuclassic.h--- linux-2.6.27-rc1/include/linux/rcuclassic.h 2008-07-30 08:48:16.000000000 -0700 +++ linux-2.6.27-rc1-cpustall/include/linux/rcuclassic.h 2008-08-10 12:21:22.000000000 -0700@@ -46,6 +46,9 @@ struct rcu_ctrlblk { long cur; /* Current batch number. */ long completed; /* Number of the last completed batch */ int next_pending; /* Is the next batch already waiting? */ +#ifdef CONFIG_RCU_CPU_STALL + unsigned long gp_check; /* Time grace period should end, in seconds. */ +#endif /* #ifdef CONFIG_RCU_CPU_STALL */ int signaled;diff -urpNa -X dontdiff linux-2.6.27-rc1/kernel/rcuclassic.c linux-2.6.27-rc1-cpustall/kernel/rcuclassic.c--- linux-2.6.27-rc1/kernel/rcuclassic.c 2008-07-30 08:48:17.000000000 -0700 +++ linux-2.6.27-rc1-cpustall/kernel/rcuclassic.c 2008-08-10 17:51:32.000000000 -0700@@ -47,6 +47,7 @@ #include <linux/notifier.h> #include <linux/cpu.h> #include <linux/mutex.h> +#include <linux/time.h> #ifdef CONFIG_DEBUG_LOCK_ALLOC static struct lock_class_key rcu_lock_key;@@ -269,6 +270,81 @@ static void rcu_do_batch(struct rcu_data * rcu_check_quiescent_state calls rcu_start_batch(0) to start the next grace * period (if necessary). */ + +#ifdef CONFIG_RCU_CPU_STALL + +static inline void record_gp_check_time(struct rcu_ctrlblk *rcp) +{ + rcp->gp_check = get_seconds() + 3; +} +static void print_other_cpu_stall(struct rcu_ctrlblk *rcp) +{ + int cpu; + long delta; + + /* Only let one CPU complain about others per time interval. */ + + spin_lock(&rcp->lock); + delta = get_seconds() - rcp->gp_check; + if (delta < 2L || + cpus_empty(rcp->cpumask)) { + spin_unlock(&rcp->lock); + return; + rcp->gp_check = get_seconds() + 30; + } + spin_unlock(&rcp->lock); + + /* OK, time to rat on our buddy... */ + + printk(KERN_ERR "RCU detected CPU stalls:"); + for_each_cpu_mask(cpu, rcp->cpumask) + printk(" %d", cpu); + printk(" (detected by %d, t=%lu/%lu)\n", + smp_processor_id(), get_seconds(), rcp->gp_check); +} +static void print_cpu_stall(struct rcu_ctrlblk *rcp) +{ + printk(KERN_ERR "RCU detected CPU %d stall (t=%lu/%lu)\n", + smp_processor_id(), get_seconds(), rcp->gp_check); + dump_stack(); + spin_lock(&rcp->lock); + if ((long)(get_seconds() - rcp->gp_check) >= 0L) + rcp->gp_check = get_seconds() + 30; + spin_unlock(&rcp->lock); +} +static inline void check_cpu_stall(struct rcu_ctrlblk *rcp, + struct rcu_data *rdp) +{ + long delta; + + delta = get_seconds() - rcp->gp_check; + if (cpu_isset(smp_processor_id(), rcp->cpumask) && delta >= 0L) { + + /* We haven't checked in, so go dump stack. */ + + print_cpu_stall(rcp); + + } else if (!cpus_empty(rcp->cpumask) && delta >= 2L) { + + /* They had two seconds to dump stack, so complain. */ + + print_other_cpu_stall(rcp); + + } +} + +#else /* #ifdef CONFIG_RCU_CPU_STALL */ + +static inline void record_gp_check_time(struct rcu_ctrlblk *rcp) +{ +} +static inline void check_cpu_stall(struct rcu_ctrlblk *rcp, + struct rcu_data *rdp) +{ +} + +#endif /* #else #ifdef CONFIG_RCU_CPU_STALL */ + /* * Register a new batch of callbacks, and start it up if there is currently no * active batch and the batch to be registered has not already occurred.@@ -285,6 +361,7 @@ static void rcu_start_batch(struct rcu_c */ smp_wmb(); rcp->cur++; + record_gp_check_time(rcp); /* * Accessing nohz_cpu_mask before incrementing rcp->cur needs a@@ -468,6 +545,9 @@ static void rcu_process_callbacks(struct static int __rcu_pending(struct rcu_ctrlblk *rcp, struct rcu_data *rdp) { + /* Check for CPU stalls, if enabled. */ + check_cpu_stall(rcp, rdp); + /* This cpu has pending rcu entries and the grace period * for them has completed. */diff -urpNa -X dontdiff linux-2.6.27-rc1/lib/Kconfig.debug linux-2.6.27-rc1-cpustall/lib/Kconfig.debug--- linux-2.6.27-rc1/lib/Kconfig.debug 2008-07-30 08:48:17.000000000 -0700 +++ linux-2.6.27-rc1-cpustall/lib/Kconfig.debug 2008-08-10 12:14:18.000000000 -0700@@ -597,6 +597,19 @@ config RCU_TORTURE_TEST_RUNNABLE Say N here if you want the RCU torture tests to start only after being manually enabled via /proc. +config RCU_CPU_STALL + bool "Check for stalled CPUs delaying RCU grace periods" + depends on CLASSIC_RCU + default n + help + This option causes RCU to printk information on which + CPUs are delaying the current grace period, but only when + the grace period extends for excessive time periods. + + Say Y if you want RCU to perform such checks. + + Say N if you are unsure. + config KPROBES_SANITY_TEST bool "Kprobes sanity tests" depends on DEBUG_KERNEL