[PATCH 1/2] Fix copper/fiber auto-selection for 88e1111
DORMANTno replies
From: Wang Jian <hidden>
Date: 2008-07-11 01:30:04
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The 27.15 bit (MII_M1111_HWCFG_FIBER_COPPER_AUTO) is disable bit. When set to 1, copper/fiber auto selection is disabled. The current code to enable but actually disable auto selection. Signed-off-by: Wang Jian <redacted> --- drivers/net/phy/marvell.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 32a8503..737512c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c@@ -162,7 +162,7 @@ static int m88e1111_config_init(struct phy_device*phydev) /* Enable Fiber/Copper auto selection */ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR); - temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO; + temp &= ~MII_M1111_HWCFG_FIBER_COPPER_AUTO; phy_write(phydev, MII_M1111_PHY_EXT_SR, temp); temp = phy_read(phydev, MII_BMCR); -- 1.5.5.4