Thread (3 messages) flat view 3 messages, 2 authors, 2008-02-18

Re: [PATCH 2.6.24-mm1] error compiling net driver NE2000/NE1000

From: Andrew Morton <akpm@linux-foundation.org>
Date: 2008-02-04 21:12:06
Also in: lkml

On Mon, 4 Feb 2008 16:29:21 +0100
Pierre Peiffer [off-list ref] wrote:
Hi,

	When I compile the kernel 2.6.24-mm1 with:
CONFIG_NET_ISA=y
CONFIG_NE2000=y

I have the following compile error:
...
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `ne_block_output':
linux-2.6.24-mm1/drivers/net/ne.c:797: undefined reference to `NS8390_init'
drivers/built-in.o: In function `ne_drv_resume':
linux-2.6.24-mm1/drivers/net/ne.c:858: undefined reference to `NS8390_init'
drivers/built-in.o: In function `ne_probe1':
linux-2.6.24-mm1/drivers/net/ne.c:539: undefined reference to `NS8390_init'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2
Thanks for reporting this.
As I saw that the file 8390p.c is compiled for this driver, but not the file 
8390.c which contains this function NS8390_init(), I fixed this error with
the following patch.
Alan's
8390-split-8390-support-into-a-pausing-and-a-non-pausing-driver-core.patch
would be a prime suspect.  I assume this bug isn't present ing mainline or
in 2.6.24?
quoted hunk ↗ jump to hunk
As NS8390p_init() does the same thing than NS8390_init(), I suppose that this is the right fix ?

Signed-off-by: Pierre Peiffer <redacted>
---
 drivers/net/ne.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Index: b/drivers/net/ne.c
===================================================================
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_d
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = eip_poll;
 #endif
-	NS8390_init(dev, 0);
+	NS8390p_init(dev, 0);
 
 	ret = register_netdev(dev);
 	if (ret)
@@ -794,7 +794,7 @@ retry:
 		if (time_after(jiffies, dma_start + 2*HZ/100)) {		/* 20ms */
 			printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
 			ne_reset_8390(dev);
-			NS8390_init(dev,1);
+			NS8390p_init(dev,1);
 			break;
 		}
 
@@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform
 
 	if (netif_running(dev)) {
 		ne_reset_8390(dev);
-		NS8390_init(dev, 1);
+		NS8390p_init(dev, 1);
 		netif_device_attach(dev);
 	}
 	return 0;
  
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help