[RFT] sky2: wake-on-lan configuration issues
From: Stephen Hemminger <hidden>
Date: 2008-01-14 18:17:58
Also in:
linux-acpi
Please test this patch against Linus's current (approx 2.6.24-rc7-git5). Ignore Andrew's premature reversion attempt... This patch disables config mode access after clearing PCI settings. Signed-off-by: Stephen Hemminger <redacted>
--- a/drivers/net/sky2.c 2008-01-14 09:44:22.000000000 -0800
+++ b/drivers/net/sky2.c 2008-01-14 09:44:51.000000000 -0800@@ -621,6 +621,7 @@ static void sky2_phy_power(struct sky2_h static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD }; static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA }; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); /* Turn on/off phy power saving */ if (onoff)
@@ -632,7 +633,8 @@ static void sky2_phy_power(struct sky2_h reg1 |= coma_mode[port]; sky2_pci_write32(hw, PCI_DEV_REG1, reg1); - reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + sky2_pci_read32(hw, PCI_DEV_REG1); udelay(100); }
@@ -2426,6 +2428,7 @@ static void sky2_hw_intr(struct sky2_hw if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) { u16 pci_err; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); pci_err = sky2_pci_read16(hw, PCI_STATUS); if (net_ratelimit()) dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
@@ -2433,12 +2436,14 @@ static void sky2_hw_intr(struct sky2_hw sky2_pci_write16(hw, PCI_STATUS, pci_err | PCI_STATUS_ERROR_BITS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_IS_PCI_EXP) { /* PCI-Express uncorrectable Error occurred */ u32 err; + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS, 0xfffffffful);
@@ -2446,6 +2451,7 @@ static void sky2_hw_intr(struct sky2_hw dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err); sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } if (status & Y2_HWE_L1_MASK)
@@ -2811,6 +2817,7 @@ static void sky2_reset(struct sky2_hw *h } sky2_power_on(hw); + sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); for (i = 0; i < hw->ports; i++) { sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);