On 9/19/07, Pedro Luis D. L. [off-list ref] wrote:

Hello Jon,
I´m also working with a Phytec pcm030, but I can´t get it booted...
Which kernel are you using?
I tried to apply the 7 bestcomm patches from Sylvain and patch over these with this new ones that Domen released.
The base kernel I´m using is 2.6.22.6 from kernel.org.
Although I used the patch that creates pcm030.c in arch/platforms/52xx/ and compiled using this file, it gets halted at booting time.

Bytes transferred = 5091 (13e3 hex)
## Booting image at 00500000 ...
   Image Name:   Linux-2.6.22.6
   Created:      2007-09-19   8:53:02 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1196911 Bytes =  1.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using flat device tree at 0x400000

(No more output and boot is halted)

The root name of your device tree needs to match the name in  pcm030.c
pcm030_probe(void). If they don't match this happens.

-- 
Jon Smirl
jonsmirl@gmail.com