Thread (10 messages) 10 messages, 5 authors, 2007-05-12

Re: APIC error on 32-bit kernel

From: Jay Cliburn <hidden>
Date: 2007-05-12 14:24:26
Also in: lkml

Thank you very much for looking at this, Len.


On Fri, 11 May 2007 23:28:58 -0400
Len Brown [off-list ref] wrote:
quoted
quoted
[   94.754852] APIC error on CPU0: 08(40)
[   94.806045] APIC error on CPU0: 40(08)
        /* Here is what the APIC error bits mean:
           0: Send CS error
           1: Receive CS error
           2: Send accept error
           3: Receive accept error
           4: Reserved
           5: Send illegal vector
           6: Received illegal vector
           7: Illegal register address
        */

So the 40 means the APIC got an illegal vector.
Certainly this is consistent with the fact that
the errors start when a specific device is being
used.  I assume that device is using MSI?
Yes, the device is using MSI.
Curious that it is different in 32-bit and 64-bit mode.
Agreed, although I had one user back in March report APIC errors on the
Asus M2V board while running Debian x86_64.  I personally have never
encountered the problem under a 64-bit kernel, but I admit that just
might be random luck.

quoted
quoted
We also do not see this problem on Intel-based motherboards, with
either 32- or 64-bit kernels.
A full raft of documentation -- including acpidump and
linux-firmware-kit output, console capture, kernel config, lspci
-vvxxx (with apic=debug boot option), dmesg, and /proc/interrupts
-- is available at http://www.hogchain.net/m2v/apic-problem/

[06Dh 109  2]      Boot Architecture Flags : 0003

for what it is worth, the bit in ACPI that is used to
disable MSI support is not set -- so as  far as the BIOS
is concerned, this system should support MSI.

Is it an add-in card, or lan-on-motherboard?
This is a PCIe LAN-on-motherboard.

My goal is to understand whether this is a problem in the atl1 driver,
or a problem on the motherboard.  If it's the former, obviously I want
to fix it.  If it's the latter, then I want to disable MSI in the driver
when we discover we're running on this motherboard.

Thanks again for taking time to look at this.  Any advice or hints you
provide will be greatly appreciated.

Jay
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help