Re: Natsemi DP83815 driver spaming

quoted

eth0: Media selection timer tick.
eth0: possible phy reset: re-initializing

This is why the reset is being triggered - it's a workaround for a hardware
bug which checks to make sure the hardware is in the state that the
kernel thinks it is is going off.  The code has this explanatory comment:

 * 2) check for sudden death of the NIC:
 *    It seems that a reference set for this chip went out with incorrect info,
 *    and there exist boards that aren't quite right.  An unexpected voltage
 *    drop can cause the PHY to get itself in a weird state (basically reset).
 *    NOTE: this only seems to affect revC chips.

Yes. I have revision C chip.
 

I'd suggest checking your power supply as a first step.

5,25V when not connected. 5,04V when connected to Wyse. I don't have access to 
osciloscope.
I will check if this code is nedded. If it is then I will try to get new power 
supply.
 

[BTW, as Andrew said please don't drop people from the CC.]

OK. Will not happen again.

Rafał



----------------------------------------------------------------------
Kasia Cichopek eksponuje biust  

quoted

quoted

http://link.interia.pl/f1a6f